Connection to the Gira HomeServer/FacilityServer for Apple products. Version 10.7, April 2012, size 2.31 kB.
Important: limited compatibility to ETS4! Please use these products in the ETS4 only with the two-level or three-level group address structure as found in the ETS2/3. Use with the expanded group address range or the free group address structure is not possible.
Operating instructions, Energy profile (1341 ..), Energy profile with lighting element (1342 ..), Light column (1343 ..), Light column, short (1344 ..).
The file from the ZIP folder can be used to trigger a factory reset on the Gira G1 (up to firmware version 1.4.65).
Please follow the instructions in the PDF file.
The key functions of Gira G1 can be demonstrated and tried out in demo mode.
After downloading the ZIP file, please unpack it and follow the instructions in the documentation.
Universal firmware that contains all supported operating modes.
To perform the update the Gira Project Assistant V 4.7 is required. Please follow the instructions in the enclosed documentation.
Configuration software for Gira One, Gira L1, Gira X1, Gira S1, Gira G1 and DCS-IP data interface.
Please unzip the entire contents of the ZIP folder before installing the GPA!
Control of Schüco windows and Schüco sliding systems:
The logic node uses the information from the 4-byte datapoint type "Status" of the Schüco KNX gateway to allow control with the Gira X1 function "Shutters/blinds".
HomeServer transfer parameters for controlling the DCS Communicator
The DCS Communicator PlugIn Client in the Quad Client calls up the file „TKS-Communicator.exe“ via a parameter transfer. The events are controlled via UDP telegrams.
This product database contains all Gira products which require additional start-up software (plug-in software). From ETS 3.0d Professional, German/English, 103.376 KB, 03/2012. Important: limited compatibility to ETS4! Please use these products in the ETS4 only with the two-level or three-level group address structure as found in the ETS3. Use with the expanded group address range or the free group address structure is not possible.
Mit dieser Datei können Sie die Firmware vom Gira HomeServer/FacilityServer auf die Version 4.6.0 via USB-Stick downgraden.
Die Datei kann ab den folgenden Indexständen verwendet werden:
- HomeServer: Indexstand I21
- FacilityServer: Indexstand I17
Bitte beachten Sie die Informationen in der ZIP-Datei.
Der Logikbaustein ermoglicht eine Integration von PV-Anlagen, Batteriespeichern und Wärmepumpen sowie Heizungsanlagen und Ladestationen in das KNX System.
Das vorliegende Musterprojekt soll dem Inbetriebnehmer / Projektanten als Beispiel dienen, wie sich eine individuelle Visualisierung auf Basis der ab Experte 4.7.0 verfügbaren URL-Endpoints erstellen lässt.
Dokumentation zur Tool-Software für Funktionsmodul, Beschreibung der Funktionsblöcke (Funktionsblock-Bibliothek Version 2.60), 9541 kB, Stand Mai 2001.
Dokumentation zur Tool-Software für Funktionsmodul, Beschreibung der Kompiler-Fehlermeldungen und der Fehlermeldungen des Funktionsmoduls Version 1.80, 1794 kB, Stand Mai 2001.
