Gira System 106

Modular and flexible door communication

See who's at the door – with the Gira System 106. Clean and sophisticated design, robust materials, and compact, cutting-edge technology provide convenience and security while lending your door an elegant appearance. The modular system offers extremely flexible configuration options and can be adapted or expanded at any time. Simply mounted on the wall, the system is equally well suited to new builds and retrofits. The Gira System 106 is compatible with all Gira home stations and door communication solutions from Gira.


Gira inscription service

With the Gira Inscription Service, the call buttons and info module of the Gira System 106 can be professionally designed according to your personal specifications. The template can be created and the order placed online with little effort. A design can be produced in a few steps and ordered via an online form.

Gira Inscription Service

Design & modularity

Standard dimensions

The Gira System 106 is a modular door communication system with metal front plates in an elegant, minimalist design. It is based on individual modules whose basic measurements are 106.5 × 106.5 mm, and which can be combined flexibly and arranged vertically, horizontally, or in squares.


Modularity

The Gira System 106 includes a total of seven modules, allowing a range of solutions to be created – whether it be in single-family homes or larger properties.

All System 106 modules at a glance


Surfaces

The Gira System 106 offers four different metal design fronts: stainless steel, the salt-water resistant stainless steel V4A for the Renz mailbox system, aluminium, and white lacquered. The fronts can be exchanged at any time, without the underlying technology having to be changed.


Flat design

The Gira System 106’s flat design is particularly impressive. It is based on a housing that is only 28.4 mm high, and so barely protrudes from the wall – lending your front door an elegant appearance. With a straightforward surface-mounted­installation, the door station can be easily mounted on the wall regardless of the material underneath. As a result, the System 106 not only works well with new builds, it is equally well-suited to retrofitting.


Integration into Renz mailbox systems

The Gira System 106 can be integrated into mailbox systems from Renz. The modules match the Renz Plan S series and can be installed flush in the systems. The surface structure and special polish of the salt-water resistant stainless steel variant V4A make it particularly suitable for installation.

Integrating System 106 in mailboxes

Modules

Functional and universal

The modular design allows the system’s size, design, and functionality to be individually adapted. Whether its the camera, speakerphone unit, or call button – the modules all contain the same technology. They are inserted into the housing, and covered and protected by the 3 mm-thick designer front plate. Extensions can be added and changes made at any time by exchanging the modules.

Stainless steel

In the V2A stainless steel variant, the design front of the Gira System 106 has a fine-polished, refined gleam, and lends the door station a simple elegance (240-grit satin finish). Stainless steel is regarded as a traditional material for modern construction. With a stainless steel designer front, the door station becomes a powerful statement at the building entrance. The stylish material is both durable and resilient – a great advantage, particularly for outdoor use.

Aluminium

The anodised aluminium (E6-C0) designer fronts have a silk-matt sheen, which gives the Gira System 106 door station a cool elegance: the perfect look for your entrance. With its subtle tones and accents, this material perfectly suits a modern style of architecture. At the same time, it is resistant and durable.

Traffic white

addition to the metallic styles, a version in white (RAL 9016, Traffic white) completes the range. The colour white brings its own unique charm and can also be considered a classic. Modern, fresh and unobtrusive, the white door station suits virtually any building façade and complements any style.

Gira door station module 106

The Gira System 106 door station module comprises a speakerphone unit with integrated call button, and is therefore the smallest independent unit to function as a complete door station. It contains a high-quality microphone and weather-resistant speaker for clear communication at the door.

Gira call-button module 106

The Gira System 106 call-button module is available in two versions. You have a choice of minimalist, all-metal buttons with an elegant laser inscription, or call buttons with a backlit inscription space for handy orientation in the dark. The call buttons are available in 1, 2, 3, and 4-gang variants. Function changes, e.g from 2-gang to 4-gang, can be easily made by replacing the buttons.

Gira intercom module 106

The Gira System 106 intercom module with speakerphone function enables communication between the indoors and the outdoors. The high-quality microphone, weather-resistant speaker, and background noise suppression ensure a high level of voice quality.

Gira camera module 106

A high-quality, extremely light-sensitive camera is concealed behind the durable, scratch-resistant black glass plate. The wide observation area and backlight compensation guarantee a clear image and a good overview of what’s going on outside the front door.

Gira blank module 106

A blank module in the Gira System 106 design is provided to cover up modules for future extensions, as a placeholder for temporary vacancies or as a design element for the implementation of large door stations.

Gira info module 106

The Gira System 106 info module is suitable for house numbers, names, street names, opening hours, and any other information that needs to be clearly and prominently displayed.

Gira display module 106 (DIN 18040)

Thanks to the Gira System 106 display module, visitors can see when they are being requested to speak and when the door has been opened. This also means that the module meets the DIN 18040 standard for barrier-free construction.

Technology

Artfully concealed technology

The body and flat modules of the Gira System 106 are full of innovative technology and functional details. For example, the design and glass fronts conceal the high-quality intercom system with background noise suppression, the camera with backlight compensation, the brightness sensor for the call button, or a built-in heating unit to protect the system.


Camera

An extremely light-sensitive camera is concealed behind the black glass plate. The wide observation range and backlight compensation guarantee a clear image and a good overview. The camera module also has a rotary selection switch. This enables the image sections to be set in nine different positions. The camera module contains a heating unit that can be switched on if necessary to protect the camera from fogging up and cold. An additional connection allows a second heating level to be activated for use in very cold regions. Four infrared LEDs arranged around the lens perfectly illuminate the view in front of the camera. In night mode, infrared lighting enables a glare-free illumination of the field of view. The camera can be turned on at night without this being visible outside. If any strong backlight, such as car headlights, hits the camera, individual image areas often remain extremely underexposed. The backlight compensation brightens up these dark areas, so that they are just as easy to see.

Extremely light-sensitive camera with a wide observation range

Four infrared LEDs arranged around the lens perfectly illuminate the view in front of the camera


Speaker and microphone

To prevent vandalism, a high-quality microphone and a weather-proof speaker are tucked away safely behind the sturdy design front. The high-quality microphone and background noise suppression ensure a high level of voice quality and interference-free communication. The intercom module or door station module houses the brightness sensor, which regulates the illumination of the call buttons. This takes place using two brightness levels, depending on the current ambient light conditions.

Vandal-resistant design: a sturdy metal plate protects the technology concealed behind it

Peek inside: view of the intercom module underneath the design front


Call buttons

A single module contains all the technology for fitting the door station with call buttons. Its flexible design allows it to be equipped either with plates made entirely of metal, or with buttons featuring a backlit inscription space. In each case, the corresponding cover plate can simply be selected and placed on top of the module. The call buttons are available in 1, 2, 3, and 4-gang variants. The underlying module can be fitted with the desired number of buttons.

Call buttons with a
full-metal surface

Call buttons with backlit
inscription space

Intelligent design: LED and fine, tactile – yet robust – mechanics


Body

The robust housing has a CDP coating, which provides protection against corrosion, and is recyclable. The housing also has rubber covers on the elongated slots and a membrane with a small opening covered in a geotextile fleece. This offers protection against humidity and ensures an ideal micro-climate.

Peek inside the housing with the covered elongated slots and membrane


2-wire bus

Only two lines are required to supply power to the various components and transmit all audio and video signals. This means that an existing doorbell system can be easily replaced by the Gira door communication system, for example. Instead of routing new lines, existing lines are used.

Only two lines are required for the transmission of all audio and video signals.

Installation

Simple and secure installation

The Gira System 106 is intelligently designed, right down to the finest details, which means that it is very easy and safe for the fitter to install. The housing should be mounted separately on the wall. The different modules are then initially inserted into a function support frame, which is then snapped into place in the housing. A particularly useful feature is the safety bond, which prevents the modules from accidentally falling out during installation. The housing can then be screwed shut and made theft-proof with a patented bit holder and the special bit.


1.
Simply screw the body to the wall

Screw the body of the door station to the wall in the desired position.

2.
Insert the modules into the function support frame

Insert the various modules into the function support frame.

3.
Securely attach the modules

Each module is attached to the function support frame at all four corners with bayonet locks. A quarter turn of the locks is sufficient. An audible click then signals the correct fit of the locks.

4.
Adjust the camera’s image section

The camera module has a rotary selection switch on its rear side. This enables the image sections to be set to nine different positions. If the camera cannot be installed at the optimum height of 1.5 m, the image sections can be adjusted accordingly using the rotary selection switch.

5.
Connect the modules securely

Connect the modules to one another with flat ribbon cable and also insert the terminating resistors. The flat ribbon cable should be plugged in vertically or horizontally. In addition to the function support frame, there is also a safety bond. This prevents the inserted modules from accidentally falling out during installation.

6.
Connect via the Gira 2-wire bus

The Gira System 106 is based on 2-wire bus technology. Only two lines are required to supply power to the various components and transmit all audio and video signals. This enables rapid installation with reverse polarity protection.

7.
Snap the function support frame into place

Once the function support frame is fully loaded, hook it onto the top of the housing and lay its entire length over the body. Then snap the function support frame, together with its modules, into place on the body.

8.
Securely close the housing

The patented bit holder and special bit are now used to screw in the grub screw beneath the housing until it is flush with the housing edge.

9.
Fully mounted door station

The door station with anti-theft protection is now fixed securely to the wall.

Integration into mailboxes

Seamless integration – mailbox solutions in cooperation with Renz

Door stations and mailboxes harmoniously combined – the Gira System 106 can also be integrated into Renz’s mailbox systems. As a premium supplier of mailbox solutions, Renz offers a range of sophisticated products. The Renz Plan S series comes with an installation kit that enables the Gira System 106 to be installed flush with the surface. The V4A stainless steel surfaces from the two manufacturers are particularly well matched to one another. Nevertheless, slight differences that may be visible depending on the incidence of light in particular cannot be completely ruled out.


Integration in Renz Plan S

The Renz Plan S series includes vertical mailboxes for flush-mounted installation. The flat surface of the mailboxes is particularly well suited to use in an even wall. It can be installed entirely according to preference using a plaster cover frame, close-fitting cladding, or with a shadow joint. A further advantage of the mailboxes is their insulated letter flap with noise reduction. The mailboxes are available in a variety of materials, including stainless steel V4A to match the Gira System 106. The Gira System 106 can be perfectly integrated flush into the Renz Plan S series. Mailboxes and door communication – all the functions you need in an entrance area can be condensed into a single space. Not only is this practical, but it also ensures a uniform appearance. Once the flush-mounted installation of the mailbox has been completed, no further work is necessary and no additional wall space needs to be taken up.


Integration in Renz Plan S pillar


The Renz Plan S series also includes a mailbox pillar, forming a free-standing solution for entrance areas. The sophisticated appearance of the pillar’s flush surface is impressively underlined by the 2 mm thick flat material on all sides. Not only is the solid V4A stainless steel robust with a high-quality feel, it also transforms the mailbox pillar into something very special. The Gira System 106 with its stainless steel and black glass design fronts is the perfect match for the pillar from Renz.


Integration in myRENZbox

Today, parcel services deliver around ten million packages each day in Germany, and this figure is increasing sharply. Online trade is booming, with more and more items being ordered on the internet. Parcel volumes are also rising as a result, particularly in the private customer segment. Renz has responded to the growing demand with its myRENZbox parcel box units for single and multi-family homes and apartment blocks. The smart solutions make receiving or sending packages from home incredibly straightforward. Regardless of whether the inhabitants are there or not. With Gira System 106, door communication can also be perfectly integrated flush into the smart parcel system. In this way, all the necessary functions harmoniously combine to form a visually flush, yet highly functional area in the entrance.


Contacts for queries

Please contact Renz directly if you have any questions regarding the mechanical installation of the Gira door communication components in Renz mailbox units:
Erwin Renz
Metallwarenfabrik GmbH & Co KG
Boschstraße 3
71737 Kirchberg an der Murr
Germany
Tel.: +49 7144 301-0
Fax: +49 7144 301-185
www.briefkasten.de

Compatibility

Compatible home stations
Gira System 106

The counterpart to the door station on the outside of the entrance is the home station, the speech and operation unit for indoor use. The Gira System 106 can be combined with any of the home stations from the Gira door communication system.

Home stations for indoor use


Door communication tailored
to the design line

Gira home stations are voice and operation units at the front door. Gira offers stations for flush-mounted installation that can be combined to match the Gira design lines. Pre-assembled versions, such as the Gira surface-mounted video home station, are available for surface-mounted installation. These can be integrated into the Gira design lines, but can also used without cover frames.


Door communication with the Gira G1 –
the all-rounder for building technology

When combined with the Gira DCS IP gateway, the Gira G1 can also be used as a home station. The camera image automatically appears on the display when the doorbell rings. At the touch of a finger, communication can be initiated, the door opened, or the light switched on – all on the bright 9×16 cm multi-touch display, which provides particular convenience and clarity. The Gira G1 also enables many other functions to be controlled via the KNX system, for example lighting, blinds, and room temperature. The Gira G1 is the smart central operating unit, the all-rounder for all of the building technology.

 

Gira G1


Door communication while on the move

The Gira DCS-IP gateway allows the door intercom system to be accessed via iOS and Android smartphones and tablets. The communication is encrypted using Secure Data Access, which is also used in the Gira S1 and guarantees maximum security.

More about mobile door communication


Gira DCS-TC gateway
Door communication by telephone

The Gira DCS-TC gateway integrates the Gira door communication system into the existing telephone system. In this way, landline and mobile telephones can be used to accept calls and open the door.

Door communication by telephone with the DCS-TC gateway


Gira DCS-IP gateway –
Door communication with the computer

At work, in the office, or at home: with the Gira DCS-IP gateway, computers can be used as additional door intercoms. Occupants can conveniently see who is at the door, talk to visitors, and open the door with the click of a mouse.

 

Using the computer as a door intercom system with the DCS-IP gateway

Videos/clips

Modular and flexible door communication – the Gira System 106 video

Clean and sophisticated design, robust materials and state-of-the-art technology – the video about the new Gira System 106 provides a brief overview of the many functional details and provides information on the benefits offered by the modular design during installation, the high-quality material and the sustainability aspects.

View the System 106 video


Gira System 106 clips

Design

The Gira System 106 is a modular door communication system with metal front plates in an elegant, minimalist design. It is based on individual modules whose basic measurements are 106.5 × 106.5 mm, and which can be combined flexibly and arranged vertically, horizontally, or in squares.

View System 106 design clip

Technology

The body and flat modules of the Gira System 106 are full of innovative technology and functional details. For example, the design and glass fronts conceal the high-quality intercom system with background noise suppression, the camera with backlight compensation, the brightness sensor for the call button and a built-in heating unit to protect the system.

View System 106 technology clip

Modules

The Gira System 106 is based on a clear grid and includes a total of seven modules allowing a range of solutions to be created – from single-family homes to larger properties.

View System 106 modules clip

Installation

Installing the Gira System 106 is easy. First, the body of the door station is securely screwed to the wall. The modules are then fixed to a support frame using bayonet locks, linked to each other with flat ribbon cable, and connected to the 2-wire bus.

View System 106 installation clip

Environment and sustainability

When developing and selecting the materials for the Gira System 106, a high priority was given to sustainability. One of the characteristics of the System 106 is that it has also been designed to be dismantled in an extremely environmentally-friendly way, as all the materials used can be fully separated from each other.

View System 106 environment clip

Download

Operating instructions

System 106 Door station module

Operating instructions

Bestell-Nr 5565 .., 5569 ..

PDF, 841,7 KB

Download


System 106 Intercom module

Operating instructions

Bestell-Nr 5563 ..

PDF, 585,3 KB

Download


System 106 call-button module

Operating instructions

Bestell-Nr 5531 .., 5532 .., 5533 .., 5534 .., 5539 000

PDF, 946,0 KB

Download


System 106 camera module

Operating instructions

Bestell-Nr 5561 000

PDF, 1,3 MB

Download


System 106 DIN 18040 display module

Operating instructions

Bestell-Nr 5567 000

PDF, 523,5 KB

Download


System 106 Info module / System 106 Blank module

Operating instructions

Bestell-Nr 5560 .., 5568 ..

PDF, 1,6 MB

Download

Brochures

Gira System 106 (EN)

Brochure System 106 Order no. 18420 90

Bestell-Nr 18420 90

PDF, 2,9 MB

Download


Gira door communication

Bestell-Nr 18123 90

PDF, 2,2 MB

Download

Features Design Modules Technology Installation Mailbox solutions Compatibility Videos/clips Download

Gira uses cookies for websites in the domain gira.de. Some of them are essential, while others help us to improve this website and your experience. Find out more about the cookies used by us or third parties and your options for issuing them in our data protection declaration.

If you reject cookies for statistical analysis, no tracking cookies will be sent. Your visit to this website will then not be recorded.