System and control devices

The Gira audio control device is intended for use with door communication systems in which only audio components are supplied.

The Gira video control device is required if video components are used in addition to audio components.

The Gira switching actuator is used to carry out switching functions on the Gira home station or via an unassigned call button, for example switching a staircase light on/off or opening the garage door.

A power supply of 24 V DC 300 mA is required in systems with multiple cameras, for supplying power to the call-button illumination in large properties and for operation in combination with the Gira TC gateway.

The Gira DCS-IP gateway makes the door communication system even more convenient and flexible to operate. A single device enables the Gira door communication system to be connected via the network to a computer, to smartphones and to the Gira G1.

The Gira DCS-camera gateway enables greater flexibility with video door communication by allowing one or more external cameras to be integrated into the Gira door communication system and installed anywhere, independently of the door station.

The Gira video multiplexer bundles the video signals of door stations, DCS-camera gateways and DCS-IP gateways.

The Gira video amplifier extends the range of Gira door communication systems with video function.

The Gira video distributor distributes the video signal of the door stations, the DCS-camera gateway and the DCS-IP gateway to the home stations.

The Gira DCS repeater is an active component used to extend the Gira door communication system; it allows both the cable length and the number of devices in a door intercom to be doubled.

The DCS-IP data interface connects the Gira 2-wire bus to the IP network. It can be used either as a pure configuration tool or to control convenience functions of the Gira door communication system and other systems (e.g. KNX system).