Gira E2

Minimalist design and durable materials

The Gira E2 design line combines pared-down design with functional materials and smart technology. It is available in shatterproof, UV-resistant thermoplastic in pure white matt, pure white glossy, aluminium and anthracite, as well as in high-quality stainless steel and on-trend surface black matt. It allows buildings to be outfitted in a consistent design while also being able to differentiate separate areas according to their quality rating. More than 300 functions from Gira System 55 are available for the design line.

E2 flat installation

As a further design option, all versions of the Gira E2 design line can also be installed such that they protrude just 3.4 mm from the wall. Suitable devices and flush-mounted sockets are available as accessories.

E2 normal installation

The original. The clean aesthetics, the simplified design and the exclusive colour scheme of the popular Gira E2 design line fits perfectly into a wide range of furnishing styles – both private and business.

E2 surface-mounted version

The surface-mounted solution in pure white glossy is a new addition to the Gira E2 design line. It bridges the gap for retrofitting, so it can be installed anywhere where no lines or flush-mounted boxes have been installed in advance.


E2 water-protected to IP 44

Gira E2 is a design line for flush-mounted installation in dry rooms in accordance with IP 20. However, switches, buttons and SCHUKO socket outlets with hinged covers included in the range can also be installed in moisture-prone areas with IP 44 water protection through the use of special seal sets.


A simple, fast and clean exchange.

In general, switches and socket outlets etc. can be exchanged very easily. If you have already installed frames from a design line belonging to Gira System 55, it is especially easy – all frames from the Gira Standard 55, E2, E3, Event, Esprit and Classix ranges are compatible with one another. Simply exchange the frames – the existing inserts can continue to be used. This is a simple way to lend the room new accents in terms of colour and physical appearance.

Colour variants

New diversity

The extended assortment of the Gira E2 switch range enables buildings to be fitted with a uniform design, while at the same time varying them by colour choice and value. Stainless steel with a cool-silver satin finish is not only highly aesthetic, but also rust-free, weather and heat-resistant, and naturally antibacterial. The shatter-proof, UV-resistant, easy-care thermoplastic versions come in colours on a neutral grey scale ranging from pure white matt, pure white glossy and aluminium to anthracite and black matt. This allows them to fit seamlessly into the most varied architectural styles while also combining perfectly with the stainless steel versions of Gira E2.

Gira E2,
stainless steel

Gira E2 flat installation,
stainless steel

Gira E2
pure white glossy

Gira E2 flat installation
pure white glossy

Gira E2,
pure white matt

Gira E2 flat installation,
pure white matt

Gira E2,
colour aluminium

Gira E2 flat installation,
colour aluminium

Gira E2
anthracite

Gira E2 flat installation,
anthracite

Gira E2
black matt

Gira E2 flat installation,
black matt

Technical data

General

Platform
System 55, which allows over 300 functions to be integrated.
Installation type:
Flush-mounted

Materials

Thermoplastic:
Shatter-proof, UV-resistant plastic with easy-care surface.
Stainless steel:
high-quality material, tough surface with cool-silver satin sheen

Gira E2 flat installation dimensions and installation

Frame 1-gang:
W 87.8 × H 87.8 × D 3.4 mm
Thermoplastic corner radius:
0.5 mm
Stainless steel corner radius:
2.5 mm
Installation:
Installation in cavity walls using Gira device boxes and/or in brickwork in special device boxes and flush-mounted boxes (accessories)


Gira E2 dimensions and installation

Frame 1-gang:
W 80.8 × H 80.8 × D 9.3 mm
Thermoplastic corner radius:
0.5 mm
Stainless steel corner radius:
2.5 mm
Installation:
Installation in standard flush-mounted or cavity boxes


Gira E2 surface-mounted dimensions and installation

Frame 1-gang:
W 80.8 x H 80.8 x D 59.2 mm
Thermoplastic corner radius:
0.5 mm
Installation:
surface-mounted

Variants

Pure white glossy

Pure white matt

colour aluminium

Anthracite

Stainless steel

Black matt


E2 cover frame variants

1fach

W 80.mm
H 80.8 mm
D 9.3 mm

2fach

W 80.8 mm
H 151.9 mm
D 9.3 mm

2fach
without crossbar

W 80.8mm
H 151.9 mm
D 9.3 mm

3fach

W 80.8 mm
H 223.4 mm
D 9.3 mm

4fach

W 80.8mm
H 294.7 mm
D 9.3 mm

5fach

W 80.8 mm
H 366.0 mm
D 9.3 mm


Cover frame variant E2 available in thermoplastic only

1.5-gang

W 80.8 mm
H 121.4 mm
D 9.3 mm


E2 cover frame variants, flat installation

1fach

W 87.8 mm
H 87.8 mm
D 3.4 mm

2fach

W 87.8 mm
H 158.9 mm
D 3.4 mm

2fach
without crossbar

W 87.8 mm
H 158.9 mm
D 3.4 mm

3fach

W 87.8 mm
H 230.3 mm
D 3.4 mm

4fach

W 87.8 mm
H 301.5 mm
D 3.4 mm


Gira E2 surface-mounted cover frame variants

1fach

W 80.mm
H 80.8 mm
D 59.2 mm

2fach

W 80.8 mm
H 151.9 mm
D 59.2 mm

3fach

W 80.8 mm
H 223.4 mm
D 59.2 mm

Sample functions

Intelligent functions for the Smart Home

Based on the modular Gira System 55, the Gira E2 design line offers more than 300 functions for greater convenience, security and savings. From smart individual solutions, to door communication and networked building technology, KNX or wireless, you can implement your own Smart Home with various levels of configuration and it will be ready for whatever the future holds.

More about the Gira System 55


Gira Sensotec LED

Finding your way safely in the dark and switching on the room light if needed with a single contactless motion: the Gira Sensotec LED unites these functions in a single device. The Gira Sensotec LED is a contactless switch with integrated LED orientation light. When motion is detected, it switches on the orientation light. If more light is needed, the user can switch on the lighting with a single contactless motion from a distance of 5 cm.

Gira Sensotec LED

Gira eNet wireless wall transmitter

Gira eNet is the bi-directional wireless system for the smart networking of building technology, allowing you to control lighting, blinds and scenes easily and by remote. The battery-operated Gira wireless wall transmitters can be conveniently placed precisely where switches or buttons are required, regardless of the mains connections. They can be either securely mounted on the wall using screws or conveniently attached to smooth surfaces with adhesive strips. Bi-colour LEDs indicate both the signal transmission status and the actuator status.

eNet wireless wall transmitter

Gira surface-mounted video home station Plus

The front of the surface-mounted home station video Plus is homogeneous: the 5.6 cm (2.2") TFT colour display is flush with the capacitive sensor buttons of the control panel. The user simply needs to gently touch the appropriate symbol. In order to ensure greater operational reliability, internal calls and switching actions can be assigned individual names. The speakerphone function offers excellent voice quality, even if the speaker is not standing directly in front of the microphone.

Gira surface-mounted video home station Plus

Gira touch sensor 3 Plus

The Gira touch sensor 3 Plus guarantees a particularly high level of convenience when operating numerous KNX functions. In addition to an integrated temperature sensor to measure the local temperature, it also features a controller for direct room temperature control. An external temperature sensor can also be connected if desired. The graphic display clearly shows temperature values, controller status, and messages from the KNX system.

Gira pushbutton sensor 3 Plus

Gira SCHUKO socket outlet with
LED orientation light

The Gira SCHUKO socket outlet with LED orientation light has a recessed light strip that projects a light corridor downwards by means of a white LED. This provides glare-free, indirect orientation lighting. The Gira socket outlet with LED orientation light also features a twilight sensor that automatically turns on the light when darkness sets in and switches it off again when there is enough natural light.

SCHUKO socket outlet with LED orientation light

Gira RDS flush-mounted radio

The Gira RDS flush-mounted radio simply sits in the wall – just like your light switches and socket outlets. This does away with the need for annoying cables, and work surfaces and counters can be kept free. The Gira RDS flush-mounted radio is characterised by its pure sound and it also supports the processing of stereo signals. When paired with a Gira docking station (installed separately), external music sources can be connected to the Gira flush-mounted RDS radio via Bluetooth.

RDS flush-mounted radio

Gira System 3000 Display blind timer

Touch-sensitive buttons and a high-contrast illuminated display make operating the Gira System 3000 Display blind timer easier than ever before. In addition to manual operation, the current time can be saved to programme the movement times for all seven days. Alternatively, the settings can be customised separately for specific days via the menu. The changeover between summer and winter time is carried out automatically.

System 3000 Display blind timer

Gira pushbutton switch water-protected to IP 44

The functions switch, button, and SCHUKO socket outlets with hinged covers can also be installed in moisture-prone areas in accordance with the IP44 water protection rating through the use of special seal sets.

Gira surface-mounted switch

High-quality equipment also suitable for retrofitting: If, for example, no cable or flush-mounted boxes are installed in the wall in the cellar or in industrial lofts, surface-mounted solutions are the ideal choice. The highly simplified design of the Gira E2 surface-mounted
design line allows a sophisticated, modern look to be created for light or blind control, for example.

Gallery

Gira E2 flat installation, black matt,
pushbutton sensor 3 Komfort, 3-gang

Gira E2 flat installation, pure white glossy,
surface-mounted video home station

Gira E2, pure white glossy,
blind control button Standard

Gira E2 flat installation, anthracite,
pushbutton switch

Gira E2, colour aluminium,
pushbutton sensor 3 Komfort, 3-gang

Gira E2 flat installation, stainless steel,
pushbutton switch

Gira E2, black matt
pushbutton switch

Gira E2, black matt
blind timer and timer Display

Download

Installation instructions

E2 device box

Dimensions of the E2 device box 1 - 4-gang.

PDF, 176,6 KB

Download


E2 flush-mounted box

Dimensions of the E2 flush-mounted box 1 - 4-gang.

PDF, 119,2 KB

Download

Brochures

Gira Design Line & Function

Bestell-Nr 18125 90

PDF, 4,4 MB

Download


E2

Bestell-Nr 18430 90

PDF, 2,4 MB

Download

Features Variants Technical data Sample functions Gallery Download

Gira uses cookies for websites in the domain gira.de. Some of them are essential, while others help us to improve this website and your experience. Find out more about the cookies used by us or third parties and your options for issuing them in our data protection declaration.

If you reject cookies for statistical analysis, no tracking cookies will be sent. Your visit to this website will then not be recorded.