Gira surface-mounted video home station Plus

• Can be integrated into the Gira design lines
• Operating buttons with capacitive sensor technology
• Speaker with connectible microphone
• Automatic call acceptance for internal calls
• Local image memory

• 5.6 cm (2.2”) TFT colour display
• Status display and menu navigation in the display
• Automatic door opener
• Ten polyphonic ringtones can be saved
• Card slot for microSD memory card

Integration into the Gira design lines facilitates the uniform appearance of the door communication system and electrical installation. Available for the Gira Standard 55, E2, Event, Esprit, ClassiX, and E22 design lines, as well as the F100 design lines. If desired, the home station can also be installed without the frame.

The state-of-the-art 5.6 cm [2.2"] TFT colour display offers good visibility from various angles of vision and a high depth of focus, especially when visitors are standing a little further away from the door. In addition to this, system settings can be made via an on-screen display, similarly to the way they are set on televisions. The display is activated automatically as soon as someone rings the doorbell, but can also be switched to manual operation.

A special feature of the Gira surface-mounted video home station Plus is its homogeneous front with the integrated operating buttons. The operating buttons feature capacitive sensor technology and react to the slightest touch.

The intercom unit is equipped with a voice-operated switch. The microphone is automatically activated where the level is higher. If ambient noise at the front door is particularly high, the person at the home station can activate the microphone with an override function by pressing a button.

Both features are optionally enabled by the electrician and can then be activated via the menu. The functions are very convenient, e.g. for medical practices, and enable doors to be opened automatically as well as speaking or listening directly in a room, e.g. from the reception to the doctor's consulting room and vice versa.

Depending on the settings, up to three images are taken and saved whenever the doorbell is rung. This allows you to see who was at the door while you were out. If desired, images can also be recorded manually during a conversation.

Up to ten customised polyphonic ringtones can be saved on the integrated microSD memory card. During installation, the microSD memory card is inserted at the rear of the device so as not to disturb the harmonious appearance.

The Gira surface-mounted video home station Plus can be easily installed in two steps: During the rough installation, the base plate is first mounted on the wall with the connection terminals. Pre-wiring can thus be carried out without the device. The home station is later locked directly onto the mounting plate, establishing automatic contact with the device.