Gira System 3000

Lighting and blind control made easy

The Gira System 3000 offers maximum flexibility and optimum convenience for advanced light and blinds control: with six different operating top units, which can be universally used for both lighting and blinds, the system offers easy operation and a functional and aesthetically pleasing solution for every desired level of comfort. The top units are characterised by intuitive operation.


Operating top units for Gira System 3000 blind and lighting control

The operating top units in the Gira System 3000 blind controllers feature intuitive operation and clear button labelling. Six options provide tailored convenience. Even the simplest operating top units store an individual intermediate position. The functions of the Memory and Display devices range from simple time control to comprehensive control options with the blind timer and timer Bluetooth. Simple settings are made directly on the device without any tools and comprehensive programming is carried out easily and conveniently with the Gira App via a smartphone or tablet. The motion detectors for automatic lighting control can also be operated in the same way in the System 3000. The System 3000 operating top unit 2-gang controls the two switching or dimming channels independently of one another.

More about the operating top units


New: Easy control of the Gira System 3000 by remote

The versatile Gira System 3000 has now been extended: existing Gira System 3000 top units can now be easily exchanged for a new Gira eNet wireless operating top unit. When combined with the eNet wireless wall transmitter, an additional switching point can be added to the room. For even greater convenience, the eNet wireless operating top unit can also be used with the eNet server to enable control via smartphone, tablet or voice control.

More about the Gira wireless operating top unit in the online catalogue


Intuitive operation and programming with the Gira System 3000 blind timer and timer display

Touch-sensitive buttons and a high-contrast illuminated display make operating the new Gira blind timer and timer display easier than ever before. In addition to manual control, the current time can be saved at the push of a button to program the movement times for all seven days. Alternatively, the settings can be customised separately for weekdays and the weekend via the menu. Especially convenient: The integrated astro function makes it possible to dynamically match these movement times to sunrise and sunset. The changeover between summer and winter time is carried out automatically.

More about the Gira System 3000 blind timer and timer display


2-channel units to enable them to be controlled independently of one another

The 2-channel flush-mounted inserts can be combined with all System 3000 top units. In this case, the 1-channel System 3000 top units (System 3000 operating top unit, Memory operating top unit, blind timer and timer display, blind timer and timer Bluetooth and motion detector top units) control both switching or dimming channels of the insert synchronously. However, the two dimming or switching channels can also be controlled independently of one another using the System 3000 operating top unit 2-gang. The System 3000 operating top unit 2-gang is available in cream white glossy, pure white glossy, pure white matt, anthracite, black matt, colour aluminium and stainless steel.

Simple rocker buttons and the System 3000 2-wire and 3-wire auxiliary inserts can be connected as auxiliary units. Combining the 3-wire auxiliary unit with the 2-gang operating top unit allows separate operation of the two dimming channels, even via the auxiliary unit, with only one auxiliary unit wire connected to “Terminal 1”.


Gira System 3000 relais switching insert 2-gang

The 1-channel System 3000 top units control both the switching and dimming channels of the insert synchronously. In order to do so, the System 3000 relais switching insert 2-gang automatically becomes a follow-up actuator: an ON and OFF delay can be set for the second switching channel, which in a bathroom, for example, switches the fan on and off with a time delay to the light.


System 3000 universal LED dimming insert Komfort 2-gang

The System 3000 universal LED dimming insert Komfort 2-gang allows users to switch and dim all common types of light source, including LED lights. The dimming insert has two independent outputs for two light groups, which can also be dimmed in various operating modes.


Simple and flexible installation

Installing the blind control inserts is now even easier. With an installation depth of just 24 millimetres, the new inserts leave more space in the flush-mounted box, which means greater wiring flexibility. Recessed mounting claws make for easier installation and ensure greater safety. Connected servos can be started up without an operating top unit using a test button to check their function. Depending on the operating top unit, the basic rating is just 0.2 W – 0.5 W.

More about installation


Award-winning design for any ambiance

Ten design lines, more than 75 frame variants, and more than 300 inserts in different colours and materials: the modular Gira design system offers a great range of designs and functions. In addition to switches and socket outlets, and the operating top units for the System 3000 blind controller, numerous other functions can be integrated, such as door intercoms or KNX pushbutton sensors.

More about the variants


Design and awards

Product and interface design Gira Display blind timer:
schmitz Visuelle Kommunikation, Wuppertal

Operating top units

The various Gira System 3000 operating top units allow for customised convenience and make life in your home even more pleasant, safer and more economical. The Gira System 3000 offers numerous options for your personal lighting and blind control: from the simple on/off switch, to raising and lowering the blinds with arrow symbols, and even an extensive range of functions that can be conveniently controlled via an app or via the blind timer and timer display.

Easy operation via Bluetooth with the Gira System 3000 blind timer and timer

Touch-sensitive buttons make operating the blind timer and timer pleasingly quick and easy. The functions range from manual lighting and blind controllers to extensive control options. Simple settings are made directly on the device without any tools and comprehensive programming is carried out easily and conveniently with the Gira App via a smartphone or tablet. The system automatically recognises whether the operating element has been mounted on the lighting or the blind control insert.


Gira_System-3000_Bluetooth_App_EN

Convenient control and start-up via the app

Conveniently program and control from the comfort of your own sofa: the Bluetooth operating top unit takes lighting and blind control to a whole new level. Your smartphone or tablet becomes a control centre. With the Gira app, all the settings for the various lighting sources, blinds and shutters are displayed clearly on a large screen and perfectly under control. Time programs that have already been created can be easily copied into other operating top units.


Gira App functions

Gira_System_3000_Bluetooth-App_Funktions_EN

Intuitive operation and programming with the Gira System 3000 blind timer and timer display

Touch-sensitive buttons and a high-contrast illuminated display make operating the new Gira blind timer and timer display easier than ever before. In addition to manual control, the current time can be saved at the push of a button to program the movement times for all seven days. Alternatively, the settings can be customised separately for weekdays and the weekend via the menu. Especially convenient: the integrated astro function allows these movement times to be dynamically matched to sunrise and sunset. The changeover between summer and winter time is carried out automatically.


Gira System 3000 blind timer and timer display functions

Functions of the Gira System 3000 Display blind timer_EN

Start view

The start view shows the time of the next action, or alternatively the current time.

Seven-day timer

Individually programmable seven-day timer. Programming of one raising and one lowering time for Mon-Fri and Sat-Sun.

Astro function

Dynamic time control based on sunrise and sunset.

Time zones

Setting of time zones for astro times in 18 countries using the country selection.

Blocking function

Integrated blocking function available.

Summer/winter time

Automatic summer/winter time switchover can be selected.

Manual control

Manual control possible.


Other operating top units

Gira System 3000 operating top unit

The reliable standard operating top unit for manual control of blinds, shutters and awnings. This device can store an individual intermediate position: the blind can be raised or lowered to any desired position for appropriate privacy and sun protection.

Gira System 3000 operating top unit arrow symbols

The arrow symbols make the function of this operating top unit directly visible. This device also allows you to store an individual intermediate position.

Gira System 3000 operating top unit Memory

The Gira System 3000 operating top unit Memory can store both an individual intermediate position and a time for raising and lowering. If memory mode is activated, both are repeated in a 24-hour cycle. In night mode, the status and function LED are not permanently illuminated, so it will not disturb your sleep.

eNet wireless operating top unit Memory

eNet wireless operating top unit Memory with arrow symbols

existing Gira System 3000 top units can now be easily exchanged for a new Gira eNet wireless operating top unit. When combined with the eNet wireless wall transmitter, an additional switching point can be added to the room.

Dimmer

The variety of types of LED lights available is wide-ranging and their triumph is unstoppable. There are special dimmers for each type of light. With the new Gira System 3000 universal dimmers, Gira now offers a smart solution that “thinks for itself”. The Gira System 3000 LED dimmers are easy to install and automatically calibrate themselves to the load. Gira has the ideal solution for all installation types and locations. The material and processing quality are designed to ensure an extra long service life.

Highlights

 

  • Universal complete solution
  • Installation sites: in the light, in the device box or in the sub-distribution
  • For new builds, renovation/modernisation, public and private buildings
  • No confusing version diversity
  • No flickering of the light and afterglow of the lamp
  • No LED afterglow on dimmers and switches with lighting element

 

Features

 

  • Automatic calibration to leading edge or trailing edge
  • Universally suitable for all LED light types
  • Durable thanks to their high-quality workmanship
  • Increased investment security with Gira compensation module LED: retrofittable for all Tronic and universal dimmers

 

Motion detector and presence detector

For improved safety and greater convenience, the System 3000 offers components for automatic, motion-dependent lighting control. The Gira motion detectors, security lights and presence detectors automatically switch on the lighting if movement is detected in the detection field and switch off again after a set delay time has elapsed – all in a convenient and energy-saving manner.


System 3000 motion detector top unit 1.10 m Standard

The motion detector top unit regulates the lighting on the basis of motion and brightness. It automatically switches on the lighting if there is movement in the detection field and if it is dark enough.

The lighting is switched off

  • if no movement is detected and the two-minute delay time has expired, or
  • when it is light enough again and the two-minute delay time has expired.

Not only is this convenient, it also saves energy. Thanks to the special lens design, the motion detector top unit has a large detection field.

Product details:

  • Automatically switches lighting on/off, depending on thermal motion and ambient brightness
  • Detection range 180°
  • Clip-on panel to limit the detection range
  • Extended detection range via auxiliary units
  • Switch-on brightness and sensitivity can be adjusted
  • Mounting height 1.10 metres
  • Gira TX_44 also offers IP 44 splash protection

System 3000 motion detector top unit 2.20 m Standard

The motion detector top unit regulates the lighting on the basis of motion and brightness. It automatically switches on the lighting if there is movement in the detection field and if it is dark enough.

The lighting is switched off

  • if no movement is detected and the two-minute delay time has expired, or
  • when it is light enough again and the two-minute delay time has expired.

Not only is this convenient, it also saves energy. Thanks to its special lens design, the motion detector top unit has a large detection field that also includes the area below the detector. At the intended mounting height of 2.20 metres, e.g. mounted over a door, the lighting is switched on when someone takes their first step through the door.

Product details:

  • Automatically switches lighting on/off, depending on thermal motion and ambient brightness
  • Detection range 180°
  • Extended detection range via auxiliary units
  • Switch-on brightness and sensitivity can be adjusted
  • Mounting height 2.20 metres or 1.10 metres
  • Gira TX_44 also offers IP 44 splash protection

System 3000 motion detector top unit 1.10 m Komfort BT

The motion detector top unit regulates the lighting on the basis of motion and brightness. It automatically switches on the lighting if there is movement in the detection field and if it is dark enough.

The lighting is switched off

  • if no further movement is detected and the set delay time has expired, or
  • when it is light enough again and the set delay time has expired.

Not only is this convenient, it also saves energy. Thanks to the special lens design, the motion detector top unit has a large detection field.

You can set this easily using your smartphone and the Gira Bluetooth App. (Special feature for Komfort BT)

Product details:

  • Automatically switches lighting on/off, depending on thermal motion and ambient brightness
  • Detection range 180°
  • Clip-on panel to limit the detection range
  • Extended detection range via auxiliary units
  • Switch-on brightness, delay time and sensitivity can be adjusted
  • Staircase function with switch-off pre-warning
  • Optimised burglary prevention through occupancy simulation
  • Alarm function
  • Basic brightness can be set
  • Settings via smartphone and Gira Bluetooth App
  • Sliding switch for permanent on/off
  • Activation of the pairing mode for the learning procedure within the Gira Bluetooth App
  • Slide the sliding switch to the ON/AUTO position for more than four seconds.
  • Mounting height 1.10 metres
  • Gira TX_44 also offers IP 44 splash protection

System 3000 motion detector top unit 2.20 m Komfort BT

The motion detector top unit regulates the lighting on the basis of motion and brightness. It automatically switches on the lighting if there is movement in the detection field and if it is dark enough.

The lighting is switched off

  • if no further movement is detected and the set delay time has expired, or
  • when it is light enough again and the set delay time has expired.

Not only is this convenient, it also saves energy. Thanks to its special lens design, the motion detector top unit has a large detection field that also includes the area below the detector. At the intended mounting height of 2.20 metres, e.g. mounted over a door, the lighting is switched on when someone takes their first step through the door. You can set this easily using your smartphone and the Gira Bluetooth App.

Product details:

  • Automatically switches lighting on/off, depending on thermal motion and ambient brightness
  • Detection range 180°
  • Extended detection range via auxiliary units
  • Switch-on brightness, delay time and sensitivity can be adjusted
  • Staircase function with switch-off pre-warning
  • Optimised burglary prevention through occupancy simulation
  • Alarm function
  • Basic brightness can be set
  • Settings via smartphone and Gira Bluetooth App 
  • Push button for permanent on/off
  • Activation of the pairing mode for the learning procedure within the Gira Bluetooth App (the ON/AUTO button must be pressed for longer than four seconds)
  • Mounting height 2.20 metres or 1.10 metres
  • Gira TX_44 also offers IP 44 splash protection

System 3000 presence and motion detector 360° top unit BT

The presence and motion detector 360° top unit BT controls interior lighting in accordance with movement and brightness. It switches on the lighting automatically if there is motion in the detection field or if it is dark enough.

The lighting is switched off

  • if no further movement is detected and the set delay time has expired, or
  • when it is light enough again and the set delay time has expired.

Not only is this convenient, it also saves energy. Thanks to the special lens design, the presence and motion detector 360° top unit BT has a large detection field. Mounting heights of up to six metres allow for use in corridors or on staircases.

You can set this easily using your smartphone and the Gira Bluetooth App.

Product details:

  • Automatically switches lighting on/off, depending on motion and ambient brightness
  • 360° detection range for mounting heights up to six metres
  • Three independent PIR sensors, individually adjustable
  • Clip-on panel to limit the detection range
  • Extension of the detection range by grouping up to ten devices
  • Staircase function with switch-off pre-warning
  • Optimised burglary prevention through occupancy simulation
  • Continuous lighting control in combination with dimming inserts
  • Can be used as a security light and as a presence detector
  • Alarm function
  • Night light function
  • Basic brightness can be set
  • Settings via smartphone and Gira Bluetooth App
  • Mounting height three metres:
  • Detection field - tangential direction of movement: Ø 20 metres
  • Detection field - radial direction of movement: Ø 12 metres

Installation

Simple and flexible installation

Installing the new-generation lighting and blind control inserts is now easier than ever. With an extra-flat installation depth of just 24 millimetres, the new inserts leave more space in the flush-mounted box, which means greater wiring flexibility. Recessed mounting claws make for easier installation and ensure greater safety. Connected devices can be started up without an operating top unit using a test button to check their function. Depending on the operating top unit, the basic rating is just
0.2 W – 0.5 W.


Blind control inserts

Blind control insert without auxiliary input

The Gira System 3000 blind control insert without auxiliary input is a command centre for controlling electric blinds, shutters and awnings. It is possible to control motors up to a connected load of 700 W.

Blind control insert with auxiliary input

The Gira System 3000 blind control insert with auxiliary input facilitates integration into groups or central control units, enabling several blinds to be operated at the same time using a single switch. The auxiliary input also allows for automatic locking in the event of a wind alarm being triggered by a connected wind sensor.


Installation steps

Gira System 3000_Installation steps

Thanks to recessed mounting claws, the blind control inserts are easy to install in the flush-mounted box. With an installation depth of just 24 mm, they leave more space in the flush-mounted box, which means greater wiring flexibility.

The selected frame is mounted on the blind control unit, then the operating top unit is placed onto it.

The frame and operating top unit sit harmoniously together on the wall. The Gira design system with ten design lines and over 75 frame variants opens up a wealth of design options.

Technical data

General

  • Platform: System 55
  • Mounting type: Flush mounted

Design

  • 01 Gira System 3000 blind or lighting control insert
  • 02 Cover frame from the Gira design line
  • 03 Gira System 3000 operating top unit

Product features

Gira System 3000
Blind control insert without auxiliary input

  • Installation depth: 24 mm
  • Rated voltage: AC 230 V ~
  • Mains frequency: 50/60 Hz
  • Ambient temperature: -5 to +45°C
  • Contact type: μ contact
  • Standby power: Top unit dependent 0.2 to 0.5 W
  • Connected load of motors: 700 W
  • Connection: Single and fine-wire without core jacket 0.5 to 4.0 mm² or 2 × 2.5 mm² Fine-wire with core jacket 0.5 to 2.5 mm²

Gira System 3000
Blind control insert with auxiliary input

  • Installation depth: 24 mm
  • Rated voltage: AC 230 V ~
  • Mains frequency: 50/60 Hz
  • Ambient temperature: -5 to +45°C
  • Contact type: μ contact
  • Standby power: Top unit dependent 0.2 to 0.5 W
  • Connected load of motors: 700 W
  • Connection: Single and fine-wire without core jacket 0.5 to 4.0 mm² or 2 × 2.5 mm² Fine-wire with core jacket 0.5 to 2.5 mm²
  • Integration into group or central control units
  • Wind alarm lock via auxiliary input

Gira System 3000
Operating top unit

  • Manual control of lighting and blinds
  • Saving individual intermediate position
  • Ambient temperature: -5 °C to +45 °C

Gira System 3000
Operating top unit arrow symbol

  • Manual control of lighting and blinds
  • Saving individual intermediate position
  • Ambient temperature: -5 °C to +45 °C

Gira System 3000
Operating top unit Memory

  • Manual control of lighting and blinds
  • Saving individual intermediate position
  • Storage of switch-on and switch-off time. Repeat in a 24-hour cycle upon activation of memory mode
  • Blocking function to deactivate the auxiliary unit and memory mode
  • Night mode: Status LED and function LED are not lit up
    continuously
  • Ambient temperature: -5 °C to +45 °C

Gira System 3000
Blind timer and timer Display

  • Manual control of lighting and blinds
  • Saving individual intermediate position
  • Timer: Easy to operate and program
  • Rapid programming: Save the current time 
    as a switching time
  • Blocking function to deactivate the auxiliary and automatic function
  • Standard time program
  • Astro function
  • Automatic summer/winter time
  • Ambient temperature: -5 °C to +45 °C
  • Accuracy per month: ± 10 s
  • Power reserve: approx. 4 h

Control options

Raise or lower individual blinds manually on site, control several blinds in the house or office simultaneously with one switch or operate all blinds centrally on a floor or in the entire building: the Gira System 3000 offers the perfect solution to every requirement.


Function overview

A modular system made up of power inserts and operating top units offers the greatest possible freedom in implementing functions. Manual operation with a control button is possible alongside electronic time control. Central functions can also be implemented via the auxiliary inputs, e.g. by means of a wind sensor or a master button.

Videos

System 3000 - Simple light and blind control

The Gira System 3000 offers maximum flexibility and optimum convenience for advanced light and blinds control: with five different operating top units, which can be universally used for both lighting and blinds, this offers easy operation and a functional and aesthetically pleasing solution for every desired level of comfort. The top units are characterised by intuitive operation.

System 3000 - Easy installation and start-up

The Gira System 3000 has many features aimed at electricians, to simplify its installation. Its extra-flat installation depth offers more space for wiring, recessed mounting claws reduce the risk of injury, and a practical test button on the inserts allows the blinds’ direction of travel to be controlled immediately without having to attach the top unit. If necessary, the direction of travel can simply then be reversed at the press of a button.

Download

Operating instructions

Relay switching insert

User manual.

Bestell-Nr 5403 00

PDF, 509,2 KB

Download


Relay switching insert 2-gang

Operating instructions.

Bestell-Nr 5404 00

PDF, 332,4 KB

Download


Electronic switching insert

User manual.

Bestell-Nr 5405 00

PDF, 490,7 KB

Download


Impulse insert, Automatic staircase lighting mechanism

User manual.

Bestell-Nr 0821 00, 5410 00

PDF, 505,5 KB

Download


Universal LED rotary dimming insert Standard

Operating instructions.

Bestell-Nr 2450 00

PDF, 428,3 KB

Download


Universal LED rotary dimming insert Komfort

Operating instructions.

Bestell-Nr 2455 00

PDF, 519,1 KB

Download


Universal LED dimming insert Standard

User manual.

Bestell-Nr 5400 00

PDF, 329,7 KB

Download


Universal LED dimming insert Komfort

User manual.

Bestell-Nr 5401 00

PDF, 426,7 KB

Download


Universal LED dimming insert Komfort 2-gang

Operating instructions.

Bestell-Nr 5402 00

PDF, 413,4 KB

Download


Universal LED dimmer Mini

Operating instructions.

Bestell-Nr 2440 00

PDF, 384,3 KB

Download


Universal LED dimmer

User manual.

Bestell-Nr 2365 00

PDF, 434,3 KB

Download


Universal LED power booster DRA

Operating instructions.

Bestell-Nr 2383 00

PDF, 897,3 KB

Download


Flush-mounted DALI Power control unit insert

User manual.

Bestell-Nr 5406 00

PDF, 450,5 KB

Download


Auxiliary insert 2-wire

User manual.

Bestell-Nr 5408 00

PDF, 353,7 KB

Download


Auxiliary insert 3-wire

User manual

Bestell-Nr 5409 00

PDF, 698,3 KB

Download


Auxiliary insert for universal LED rotary dimming insert

Operating instructions.

Bestell-Nr 2389 00

PDF, 586,1 KB

Download


Blind control insert without auxiliary input

Operating instructions.

Bestell-Nr 5415 00

PDF, 805,3 KB

Download


Blind control insert without auxiliary input

User manual, Index I01.

Bestell-Nr 5415 00

PDF, 291,2 KB

Download


Blind control insert with auxiliary input

Operating instructions.

Bestell-Nr 5414 00

PDF, 1,3 MB

Download


Blind control insert with auxiliary input

User manual, Index I01.

Bestell-Nr 5414 00

PDF, 620,9 KB

Download


Operating top unit Memory

User manual.

Bestell-Nr 5363 ..

PDF, 173,7 KB

Download


Blind timer and timer Display

User manual.

Bestell-Nr 5366 ..

PDF, 363,8 KB

Download


Blind timer and timer BT

Operating instructions.

Bestell-Nr 5367 ..

PDF, 214,0 KB

Download


Gira Bluetooth app

Operating instructions.

PDF, 1,4 MB

Download


Brightness and temperature sensor Bluetooth

User manual.

Bestell-Nr 5466 02

PDF, 371,7 KB

Download


Brightness and temperature sensor BT

Operating instructions, from index I02.

Bestell-Nr 5466 02

PDF, 2,5 MB

Download


Motion detector top unit 1.10 m / 2,20 m Standard

User manual.

Bestell-Nr 5373 .., 5375 ..

PDF, 1,7 MB

Download


Motion detector top unit 1.10 m / 2,20 m Komfort

User manual.

Bestell-Nr 5374 .., 5376 ..

PDF, 1,9 MB

Download


Presence and motion detector 360° top unit BT

User manual.

Bestell-Nr 5377 02

PDF, 555,6 KB

Download


Room temperature controller Display, Room temperature controller BT

Operating instructions.

Bestell-Nr 5393 .., 5394 ..

PDF, 318,1 KB

Download


Room temperature controller insert with sensor connection

Operating instructions.

Bestell-Nr 5395 00

PDF, 253,7 KB

Download

Installation instructions

Rocker, 2-gang, unprinted

Instructions for assembly.

Bestell-Nr 5369 ..

PDF, 2,1 MB

Download

Brochures

Gira Smart Home

Bestell-Nr 18124 90

PDF, 2,0 MB

Download


Gira System 3000 Lighting and Blind Control

Bestell-Nr 18541 90

PDF, 2,7 MB

Download

Guides / system basics

Gira System 3000

System basics

PDF, 4,3 MB

Download

Features Operating top units Dimmer Motion detector Installation Technical data Videos Download

Gira uses cookies for websites in the domain gira.de. Some of them are essential, while others help us to improve this website and your experience. Find out more about the cookies used by us or third parties and your options for issuing them in our data protection declaration.

If you reject cookies for statistical analysis, no tracking cookies will be sent. Your visit to this website will then not be recorded.