Gira surface-mounted video door station

Surface-mounted video door station, colour aluminium, 1-gang
Surface-mounted video door station, pure white, 1-gang
Surface-mounted video door station, anthracite, 1-gang
Surface-mounted video door station, colour aluminium, 3-gang

Installed surface-mounted, with colour camera.

In addition to the Gira door station for flush-mounted installation, the Gira door communication system also offers two different door stations with colour camera for surface-mounted installation: They are completely pre-assembled (except for the camera) and are only 19 mm thick.

First, an anodised aluminium carrier profile with the PCB unit and functions is screwed onto the wall, then a cover frame protected against weathering is installed.


Speaker, microphone

The hands-free unit is equipped with a voice-operated switch. The microphone is automatically activated where the level is higher. If ambient noise at the front door is particularly high, the person at the home station can activate the microphone with an override function by pressing a button.


Call button

The name plates of the call buttons can be easily replaced without having to remove the cover frame. The buttons are evenly backlit in white with maintenance-free, energy-saving LED. If one of the call buttons on the 3-gang version is unused – for example in a two-family house – a cover plate can simply be placed over that call button, or it can take on another function, such as light switching, in combination with a switching actuator.


Colour camera

It sees it all: the Gira colour camera with wide-angle lens. It effectively covers an area of 100°. For alignment, the lens can additionally be swivelled manually by 20° in any direction. Temperature-dependent heating provides protection at sub-zero temperatures. Note: If the colour camera is used, the video control device is required. In the event of damage, the camera dome can be replaced independently of the electronics.


Day/night switching of the colour camera

A further feature: day/night switching. If the ambient brightness drops below a value of 1 lux, it automatically switches over from day to night mode. During the day, the colour camera ensures optimal colour rendering by means of automatic backlighting compensation, gain control and white balance. At night, it delivers extremely clear black and white images thanks to its light sensitivity. In order for the CCD sensor to detect all the details in the dark, the colour camera is additionally equipped with LEDs for uniform illumination of the camera's field of view.


Materials, installation

The Gira door stations are perfectly equipped for outdoor use. They consist of shatter-proof and scratch-resistant, UV-stable thermoplastic and have IP44 water protection. Fastening the cover frames using Torx screws ensures protection against theft, as once installed, the door stations can only be removed with a special Torx screwdriver. To improve protection against theft, the cover frames can also be fastened with Tri-Wing screws, which are optionally available.


Inscription service

With the Gira Inscription Service, call buttons can be professionally designed according to your personal specifications. This can be done quickly and easily online. In just a few steps you can create a personal template and order it via the form on www.beschriftung.gira.de. The finished label (available for a fee) is then delivered without delay. There is also a PDF template online that you can print out yourself free of charge. As an alternative, electrical trade specialists can use the 'DesignPro Edition Gira' inscription software from Avery Zweckform. Gira offers suitable DIN A4-size inscription sheets.


Mounting plate

The mounting plate is used to cover installation openings in the wall from a previous door intercom system when the Gira door communication system is retrofitted. It consists of anodised aluminium and has holes for wall mounting and openings for receiving the Gira flush-mounted door station.


Mounting plate dimensions

Mounting plate, 2-gang
W 130 mm x H 253 mm
Mounting plate, 3-gang
W 130 mm x H 253 mm
Mounting plate, 4-gang
W 130 mm x H 346 mm

Technical data

Power supply
26 V DC ± 2 V(bus voltage)
Connections
2 screw terminals 2-wire bus 2 screw terminals additional power supply
Dimensions
W x H x D 110 x 253 x 19 mm (without camera) W x H x D 110 x 253 x 40 mm (with camera)
Dimension of name plates
W x H 62 x 18 mm
Image capture element
CCD sensor 1/3"
Wide-angle lens
150° aperture angle
Visible detection range
Angle of detection of camera 100°
Area of detection (when swivelled by 20°)
140°
Colour system
PAL
Pixels
500 (H) x 582 (V)
Horizontal resolution
380 TV lines
Switching threshold for colour to B/W operation
1 lux
Light sensitivity in B/W operation
0.1 lux
Electronic shutter speed:
up to 1/100000 s
IR filter
integrated
Recommended camera installation height
1.50 m
Temperature range
-20°C to +50°C
Protection type
IP 44

Download

Operating instructions

Surface-mounted door station with colour camera

Operating instructions.

Bestell-Nr 1269 .., 1270 ..

PDF, 142,1 KB

Download

Brochures

Gira for the home

Planning tool for intelligent electrical installations Order no. 1911 90

Bestell-Nr 1911 90

PDF, 1,9 MB

Download


Gira door communication

Bestell-Nr 18123 90

PDF, 2,2 MB

Download

Back to top Download

Gira uses cookies for websites in the domain gira.de. Some of them are essential, while others help us to improve this website and your experience. Find out more about the cookies used by us or third parties and your options for issuing them in our data protection declaration.

If you reject cookies for statistical analysis, no tracking cookies will be sent. Your visit to this website will then not be recorded.