Gira KNX presence detector

Gira KNX presence detector

The Gira KNX presence detector is used for presence monitoring and motion detection indoors. It features an integrated bus coupling and three digital PIR sensors, and is equipped with a brightness sensor. The Gira KNX presence detector can serve as a freestanding device, main unit, or auxiliary unit at the user’s option, and enables fully-automatic or semi-automatic lighting control.

The delay time can be set flexibly and adapts to user behaviour if desired. Only a minimum and a maximum value needs to be specified for this purpose. Depending on the duration of the movement detected in the room, the Gira KNX presence detector will select a correspondingly short or long delay time.


Komfort variant with many additional functions

The device is available either as a Standard variant or Komfort variant. The Komfort variant allows the three PIR sensors to be separately analysed, and can be conveniently configured with an optional IR remote control. In addition, it has extensive software functions for intelligent lighting control. For example, light groups near to and far from the window can be controlled individually, dimming-up and dimming-down properties can be set, and function blocks can be switched over.


Additional product details for the Komfort variant

  • Five configurable function blocks for the following operating modes: presence detector, ceiling monitor and alarm device
  • Presence detector function block with lighting control
  • Brightness sensor function block with limit monitoring (coupling with presence and motion detection possible)

Installation

The Gira KNX presence detector is delivered as a ready-to-connect complete device with an integrated KNX bus coupler for flush-mounted installation. The device can also be fastened directly on the ceiling with the optional surface-mounted housing.


Accessories

  • Protective cage
  • Mounting ring for surface-mounted installation
  • IR remote control (Komfort variant)

Technical data

Mounting height
2 to 5 m
Detection angle
360º
Nominal range floor
∅ approx. 20 m (mounting height 3 m)
Nominal range desk height
∅ approx. 12 m (mounting height 3 m)
Brightness
10 to 2000 lux
Ambient temperature
-5ºC to +45ºC
Dimensions
∅ x H 103 x 50 mm

Download

Operating instructions

KNX Presence detector Standard, Comfort

Operating instructions.

Bestell-Nr 2105 .., 2106 ..

PDF, 2,0 MB

Download

Technical Documentation

KNX presence detector Standard

Technical documentation.

Bestell-Nr 2105 ..

PDF, 5,6 MB

Download


KNX presence detector Comfort

Technical documentation.

Bestell-Nr 2106 ..

PDF, 9,7 MB

Download

Back to top Download