Gira KNX continuous controller

Convenient single-room temperature control

The Gira KNX continuous controller automatically ensures constant room temperature around the clock. To do this, it records the current room temperature using the installed controller with an internal and external temperature sensor and adapts it to the occupants’ specified setpoints.

The Gira KNX continuous controller offers five different operating modes – Comfort, Standby, Night, Frost/Heat protection, and Controller lock-out (e.g. dewpoint mode) – each with its own temperature setpoints in heating and cooling mode. Because of this, occupants enjoy a high level of operating convenience and can control their energy consumption much more precisely than with conventional heating.

  • Precise temperature detection
  • Valve protection function
  • Heating and cooling mode
  • 4-gang button interface with free function assignment
  • Integrated bus coupler
  • Heating and cooling with basic and additional stage

Precise temperature detection

By detecting the temperature using an internal and/or external sensor, an average temperature value is determined for large rooms, in order to ensure an ideal temperature.


4-gang button interface with free function assignment

The KNX continuous controller has a 4-gang button interface, to which either four inputs or two outputs and two inputs can be connected, e.g. for window contacts, buttons, LEDs, etc. Input 1 can be used to connect a remote sensor for the temperature measurement in the floor. Two inputs can also be parameterized as outputs (max. 0.8 mA). In addition, the following functions can be freely assigned to the inputs: switching, dimming, blind control, light scene auxiliary unit, brightness or temperature encoder.


Valve protection function

The built-in valve protection function ensures that the valve is automatically opened cyclically every 24 hours.


A bus coupler is not required

The KNX continuous controller contains an integrated bus coupler, which means that an additional coupler is not required to install it.


Installation

A separate bus coupler is not required for the flush-mounted installation. The use of a switch terminal box for connection of the external inputs is recommended.


Accessories and expansions

An external temperature sensor (remote sensor) can also be connected via the binary input.


Technical data

Cable length for inputs/outputs:
max. 5 m
cable length temperature sensor:
max. 50 m
Ambient temperature:
-5 °C to +45 °C
Protection type:
IP 20
Installation type:
Flush mounted

Download

Operating instructions

Continuous-action regulator

Operating instructions.

Bestell-Nr 2100 ..

PDF, 1,2 MB

Download

Technical Documentation

Continuous regulator/object regulator with push button interface, 4-gang

Technical documentation.

Bestell-Nr 2100 .., 2101 ..

PDF, 1,1 MB

Download

Brochures

Gira Smart Home

Bestell-Nr 18124 90

PDF, 2,0 MB

Download

Back to top Download