Gira Keyless In Fingerprint

Gira Keyless In Fingerprint provides access control based on the unique biometric features of the human finger. The device uses a new type of fingerprint sensor. Using high-frequency technology, it analyses the structures of the deepest layers of skin of the finger used. It therefore has a high level of security against tampering and works even where there is slight soiling or injuries to the finger or gradual changes to the skin’s structure due to ageing. Gira Keyless In Fingerprint even identifies children’s fingerprints from approximately six years and upwards. 

Main applications are the opening of doors both indoors and outdoors for 1 to 6-family homes as well as in smaller, commercially used buildings. In addition, applications such as garage door control, turnstile control, barrier control as well as the control of motorised cylinder locks for front doors can all be realised.

Gira Keyless In Fingerprint is a self-learning system which merges all detected parts of a finger one after another to form a complete image. Fingers at an angle are also recognised up to a maximum of 15° from the zero axis.

Another advantage: due to the high frequency conductivity process, Gira Keyless In Fingerprint recognises whether a finger is ‘alive’. Therefore the system cannot be outwitted by silicone fingerprints or even a cut-off finger.

A warning tone or, in connection with the Gira door communication system, a tampering circuit is triggered when the Fingerprint top unit is removed without authorisation.

For easier orientation at night, the scanner surface is evenly illuminated with a white LED. A three-colour LED display signals the respective status when programming and during operation. In addition, an acknowledgement buzzer sounds. This buzzer can be switched off if desired.

The contact surface for the finger is tilted upwards by about 20°, which provides a convenient angle for the reading process while standing.

The two integrated 2-way momentary contact relays can each be assigned to two different fingers. This makes it possible to carry out different switching processes with two fingers, e.g. index fingers for opening doors and thumbs for switching the outside light on or off.

Gira Keyless In products can be integrated into the Gira door communication system. The Fingerprint and keypad can be integrated into the Gira design lines both outdoors and indoors and are available for System 55 and TX_44. With the help of a 55 x 55 mm adapter plate, the Keyless In products can also be integrated into the new Gira F100 line.