Doelgroep wijzigen: Elektrovakbedrijven
Tastsensor 3 basis 1-/2-/3-voudig, Tastsensor 3 comfort 1-/2-/3-/4-/6-voudig
Gebruiksaanwijzing.
Bestell-Nr 5111 00, 5112 00, 5113 00, 5131 00, 5132 00, 5133 00, 5134 00, 5136 00
PDF, 1,2 MB
Busaankoppelaar 3, Busaankoppelaar 3 externe sensor
Gebruiksaanwijzing.
Gira G1
Gebruiksaanwijzing (firmware versie 3.3.88 en hoger)
Schakelaktor enkelvoudig 16A / tweevoudig 6A
Gebruiksaanwijzing.
Voeding met geïntegreerde smoorspoel
Bedieningshandleiding.
Voedingseenheid 640 mA onderbrekingsvrij
Bedieningshandleiding.
USB-gegevensinterface, Basiselement USB-gegevensinterface
Bedieningsvoorschrift.
KNX RF USB data-interface (USB-stick)
Bedieningshandleiding
Schakelactor twee-/vier-/achtvoudig 16 A en vier-/achtvoudig 16 A C-belasting
Bedieningshandleiding.
Schakelactuator / jaloezieactuator Standard & Komfort voor KNX
Bedieningsvoorschrift.
Schakelactuator / jaloezieactuator Standard voor Gira One
Bedieningsvoorschrift.
Jaloezieactoren/Rolluikactor DIN-rail
Bedieningshandleiding.
Dimactor 1-/2-/4-voudig (I04)
Gebruiksaanwijzing.
Besturingseenheid 1 – 10 V viervoudig met handbediening
Gebruiksaanwijzing.
Verwarmingsactuator 6-voudig met regelaar DIN-rail
Bedieningshandleiding.
Binaire ingang zesvoudig 10-230 V AC/DC
Bedieningshandleiding.
Binaire ingang achtvoudig 12-48 V AC/DC potentiaalvrij
Bedieningshandleiding.
Universele drukcontactinterface twee-, viervoudig
Gebruiksaanwijzing.
Tastsensor 4 Komfort voor KNX
Bedieningsvoorschrift.
Tastsensor 4 Komfort voor Gira One
Bedieningsvoorschrift.
Display languages
Operating instructions.
Protocol specification of TCP/IP Gira Control
Operating instructions.
Gira HomeServer / FacilityServer
Additional information
Set up Amazon Alexa
This document describes the setup of Amazon Alexa in connection with the Gira S1 and the Gira X1 or Gira HomeServer.
Set up Google Assistant
This document describes the setup of Google Assistant in connection with the Gira S1 and the Gira X1 or Gira HomeServer.
Gira HomeServer / FacilityServer
Operating instructions.
Gira HomeServer / FacilityServer - App
Gebrauchsanleitung.
Push button sensor 3 basic 1-/2-/3-gang
Technical documentation.
Push button sensor 3 comfort 1-/2-/3-/4-/6-gang
Technical documentation.
Bus coupler 3, Bus coupler 3 external sensor
Technical documentation.
Push button sensor 3 plus 2-/5-gang (from index I05)
Technical documentation.
Gira G1
Technical documentation (firmware version 3.2.148 or higher)
One-channel universal dimming actuator FM
Technical documentation.
Power supply with integrated choke
Technical documentation.
Power supply, 640 mA uninterruptible
Technical documentation.
USB data interface, USB data interface insert
Technical documentation.
KNX RF USB data interface (USB stick)
Technical documentation
KNX RF/TP media coupler or RF repeater
Technical documentation
Switching actuator, 2-gang, with manual activation 16 A
Technical documentation.
Switching actuator 4-/8-gang 16 A with manual activation
Technical documentation.
Switching actuator 4-/8-gang 16 A with manual activation and current measurement for C loads
Technical documentation.
Switching actuator / blind actuator 16 A Standard for KNX
Technical documentation, version 2.2.
Switching actuator / blind actuator 16 A Standard for KNX
Technical documentation, version 2.5.
Switching actuator / blind actuator 16 A Komfort for KNX
Technical documentation, version 2.2.
Switching actuator / blind actuator 16 A Komfort for KNX
Technical documentation, version 2.5.
Blind actuator, 2-gang/4-gang/8-gang 230 V AC
Technical documentation.
Dimming actuator 1-/2-/4-gang (I04)
Technical documentation.
Control unit 1 – 10 V, 4-gang with manual operation
Technical documentation.
Heating actuator 6-gang with controller DRA
Technical documentation.
KNX module for smoke alarm devices Dual/VdS and Q-Label
Technical Documantation
Binary input, 6-gang 10-230 V AC/DC
Technical documentation.
Binary input, 8-gang 12-48 V AC/DC, zero-voltage
Technical documentation.
Universal button interface, 2-gang
Technical documentation.
Universal button interface, 4-gang
Technical documentation.
Pushbutton sensor 4 Komfort for KNX
Technical documentation.
Wippensets voor tastsensor 4
Montage-instructies.
Montageabstände
Mögliche Abstände bei Kombinationen Tastsensor 4
Gira G1 Firmware-update
Universele firmware die alle ondersteunde bedrijfsmodi (clients) bevat. Voor het uitvoeren van de update is de Gira projectassistent V 5.0 of hoger nodig. Volg de instructies in de bijgevoegde documentatie.
Software-update KNX IP-router
Software-update voor KNX IP-router vanaf index 02. KNX Secure wordt ondersteund door apparaten van I14.
USB-gegevensinterface, Basiselement USB-gegevensinterface
Projectbestand voor het updaten van de USB-data-interface, van ETS5.
Display languages
Software.
Gira Control Point
UPnP plug-in for the controlling of Loewe and Revox devices.
Gira Expert
Software for the Gira HomeServer 4 or Gira FacilityServer 4.
Gira HomeServer / Gira FacilityServer – Firmware
Attention! Only for Gira HomeServer 4 or Gira FacilityServer 4.
Gira X1 firmware update
To perform the update the Gira Project Assistant V 5.1 is required.
Gira X1 Logic node Schüco
Control of Schüco windows and Schüco sliding systems: The logic node uses the information from the 4-byte datapoint type "Status" of the Schüco KNX gateway to allow control with the Gira X1 function "Shutters/blinds".
Gira Smart Home Windows Client 32 Bit
Gira Smart Home App for Windows PC
Gira Smart Home Windows Client 64 Bit
Gira Smart Home App for Windows PC
Gira X1 Logic modules "Gira G1 notification" & "Gira G1 DCS-state"
Gira G1 notification: This node is used for the easy generation of text messages on the Gira G1. Gira DCS-state: This node is used to evaluate the Gira G1’s door communication status.
Factory reset on Gira G1 via SD card
The file from the ZIP folder can be used to trigger a factory reset on the Gira G1 (up to firmware version 1.4.65). Please follow the instructions in the PDF file.
Gira S1 Windows Client 32 Bit
PC application for secure access to devices in the remote network.
ZIP, 8,1 MB
Gira S1 Windows Client 64 Bit
PC application for secure access to devices in the remote network.
ZIP, 8,2 MB
Gira S1 firmware update
For Gira S1 with index status I00 and I01. To perform the update the Gira Project Assistant V 4.7 is required.
Gira S1 firmware update
For Gira S1 with index status I02 or higher. To perform the update the Gira Project Assistant V 4.7 is required.
Gira L1 firmware update
To perform the update the Gira Project Assistant V 4.1 is required.
Gira OS Connect
Software zur Anbindung von Apple-Produkten an den Gira HomeServer/FacilityServer.
Gira HomeServer / Gira FacilityServer – Firmware
Mit dieser Datei können Sie die Firmware vom Gira HomeServer/FacilityServer auf die Version 4.6.0 via USB-Stick downgraden. Die Datei kann ab den folgenden Indexständen verwendet werden: - HomeServer: Indexstand I21 - FacilityServer: Indexstand I17 Bitte beachten Sie die Informationen in der ZIP-Datei.
Gira X1 Logikbaustein Modbus-Schnittstelle
Der Logikbaustein ermoglicht eine Integration von PV-Anlagen, Batteriespeichern und Wärmepumpen sowie Heizungsanlagen und Ladestationen in das KNX System.
