Tastsensor 3 de base 1-/2-/3, Tastsensor 3 confort 1-/2-/3-/4-/6
Mode d'emploi.
Bestell-Nr 5111 00, 5112 00, 5113 00, 5131 00, 5132 00, 5133 00, 5134 00, 5136 00
PDF, 1,2 MB
Coupleur de bus 3, Coupleur de bus 3 sonde externe
Mode d'emploi.
Gira G1
Mode d'emploi (version du micrologiciel 3.3.88 et ultérieure)
Actionneurs-commutateurs 1 poste 16A, 2 postes 6A
Mode d'emploi.
Actionneur variateur universel pour montage apparent
Mode d'emploi.
Alimentation en tension avec une bobine d'arrêt intégrée
Manuel d’utilisation.
Interface de données USB, Module interface de données USB
Mode d'emploi.
Interface de donées KNX RF USB (USB Stick)
Manuel d'utilisation
Actionneur de commutation double/quadruple/octuple 16 A et quadruple/octuple 16 A charge capacitive
Manuel d’utilisation.
Actionneur de commutation / actionneur de store 16 A Standard & Komfort pour KNX
Mode d'emploi.
Actionneur de commutation / actionneur de store Standard pour Gira One
Mode d'emploi.
Actionneurs de stores/volet roulant rail DIN
Manuel d’utilisation.
Actionneur variateur 1-/2-/4 (I04)
Mode d'emploi.
Unité de commande 1 – 10 V quadruple avec manœuvre manuelle
Mode d'emploi.
Actionnneur de chauffage 6x avec thermostat rail DIN
Manuel d’utilisation.
Module KNX pour détecteur de fumée Dual/VdS et Q-Label
Instructions de montage et mode d'emploi
Entrée binaire sextuple 10-230 V AC/DC
Manuel d’utilisation.
Entrée binaire octuple 12-48 V AC/DC libre de potentiel
Manuel d’utilisation.
Interface universelle de bouton-poussoir double, quadruple
Mode d'emploi.
Display languages
Operating instructions.
Protocol specification of TCP/IP Gira Control
Operating instructions.
Gira HomeServer / FacilityServer
Additional information
Set up Amazon Alexa
This document describes the setup of Amazon Alexa in connection with the Gira S1 and the Gira X1 or Gira HomeServer.
Set up Google Assistant
This document describes the setup of Google Assistant in connection with the Gira S1 and the Gira X1 or Gira HomeServer.
Gira HomeServer / FacilityServer
Operating instructions.
Gira HomeServer / FacilityServer - App
Gebrauchsanleitung.
Push button sensor 3 basic 1-/2-/3-gang
Technical documentation.
Push button sensor 3 comfort 1-/2-/3-/4-/6-gang
Technical documentation.
Bus coupler 3, Bus coupler 3 external sensor
Technical documentation.
Push button sensor 3 plus 2-/5-gang (from index I05)
Technical documentation.
Gira G1
Technical documentation (firmware version 3.2.148 or higher)
One-channel universal dimming actuator FM
Technical documentation.
Power supply with integrated choke
Technical documentation.
Power supply, 640 mA uninterruptible
Technical documentation.
USB data interface, USB data interface insert
Technical documentation.
KNX RF USB data interface (USB stick)
Technical documentation
KNX RF/TP media coupler or RF repeater
Technical documentation
Switching actuator, 2-gang, with manual activation 16 A
Technical documentation.
Switching actuator 4-/8-gang 16 A with manual activation
Technical documentation.
Switching actuator 4-/8-gang 16 A with manual activation and current measurement for C loads
Technical documentation.
Switching actuator / blind actuator 16 A Standard for KNX
Technical documentation, version 2.2.
Switching actuator / blind actuator 16 A Standard for KNX
Technical documentation, version 2.5.
Switching actuator / blind actuator 16 A Komfort for KNX
Technical documentation, version 2.2.
Switching actuator / blind actuator 16 A Komfort for KNX
Technical documentation, version 2.5.
Blind actuator, 2-gang/4-gang/8-gang 230 V AC
Technical documentation.
Dimming actuator 1-/2-/4-gang (I04)
Technical documentation.
Control unit 1 – 10 V, 4-gang with manual operation
Technical documentation.
Heating actuator 6-gang with controller DRA
Technical documentation.
KNX module for smoke alarm devices Dual/VdS and Q-Label
Technical Documantation
Binary input, 6-gang 10-230 V AC/DC
Technical documentation.
Binary input, 8-gang 12-48 V AC/DC, zero-voltage
Technical documentation.
Universal button interface, 2-gang
Technical documentation.
Universal button interface, 4-gang
Technical documentation.
Pushbutton sensor 4 Komfort
Technical documentation.
Rocker sets for pushbutton sensor 4
Assembly instructions.
Montageabstände
Mögliche Abstände bei Kombinationen Tastsensor 4
Actionneur de chauffage KNX Gira 6x avec thermostat
Information de produit
Gira push button sensor 3
Product information Gira push button sensor 3 Controlling the Gira KNX / EIB electrical installation Order no. 17171 90
Gira Home Server
Product information Gira Home Server Controlling intelligent building technology easily – at home and while away Order no. 18871 90
Pushbutton sensor 4
Gira / Smart Home / Pushbutton sensor 4
Display languages
Software.
Gira Control Point
UPnP plug-in for the controlling of Loewe and Revox devices.
Gira Expert
Software for the Gira HomeServer 4 or Gira FacilityServer 4.
Gira HomeServer / Gira FacilityServer – Firmware
Attention! Only for Gira HomeServer 4 or Gira FacilityServer 4.
Gira X1 firmware update
To perform the update the Gira Project Assistant V 4.7 is required.
Gira Project Assistant (GPA)
Configuration software for Gira One, Gira L1, Gira X1, Gira S1, Gira G1, DCS-IP data interface and Alarm Connect security system.
ZIP, 1008,6 MB
Gira X1 Logic node Schüco
Control of Schüco windows and Schüco sliding systems: The logic node uses the information from the 4-byte datapoint type "Status" of the Schüco KNX gateway to allow control with the Gira X1 function "Shutters/blinds".
Gira Smart Home Windows Client 32 Bit
Gira Smart Home App for Windows PC
Gira Smart Home Windows Client 64 Bit
Gira Smart Home App for Windows PC
Gira X1 Logic modules "Gira G1 notification" & "Gira G1 DCS-state"
Gira G1 notification: This node is used for the easy generation of text messages on the Gira G1. Gira DCS-state: This node is used to evaluate the Gira G1’s door communication status.
Gira G1 firmware update
Universal firmware that contains all supported operating modes. To perform the update the Gira Project Assistant V 4.7 is required. Please follow the instructions in the enclosed documentation.
Factory reset on Gira G1 via SD card
The file from the ZIP folder can be used to trigger a factory reset on the Gira G1 (up to firmware version 1.4.65). Please follow the instructions in the PDF file.
Gira S1 Windows Client 32 Bit
PC application for secure access to devices in the remote network.
ZIP, 7,9 MB
Gira S1 Windows Client 64 Bit
PC application for secure access to devices in the remote network.
ZIP, 8,0 MB
Gira S1 firmware update
For Gira S1 with index status I00 and I01. To perform the update the Gira Project Assistant V 4.7 is required.
Gira S1 firmware update
For Gira S1 with index status I02 or higher. To perform the update the Gira Project Assistant V 4.7 is required.
Gira L1 firmware update
To perform the update the Gira Project Assistant V 4.1 is required.
KNX IP router
Software update for KNX IP router from index 02. KNX Secure is supported by devices from I14.
USB data interface, USB data interface insert
Project file for updating the USB data interface, from ETS5.
Gira OS Connect
Software zur Anbindung von Apple-Produkten an den Gira HomeServer/FacilityServer.
Gira HomeServer / Gira FacilityServer – Firmware
Mit dieser Datei können Sie die Firmware vom Gira HomeServer/FacilityServer auf die Version 4.6.0 via USB-Stick downgraden. Die Datei kann ab den folgenden Indexständen verwendet werden: - HomeServer: Indexstand I21 - FacilityServer: Indexstand I17 Bitte beachten Sie die Informationen in der ZIP-Datei.
Gira X1 Logikbaustein Modbus-Schnittstelle
Der Logikbaustein ermoglicht eine Integration von PV-Anlagen, Batteriespeichern und Wärmepumpen sowie Heizungsanlagen und Ladestationen in das KNX System.
BE
