Pulsador sensor 3 básico de 1-/2-/3 elemento, Pulsador sensor 3 confort de 1-/2-/3-/4-/6 elementos
Instrucciones de manejo.
Bestell-Nr 5111 00, 5112 00, 5113 00, 5131 00, 5132 00, 5133 00, 5134 00, 5136 00
PDF, 1,2 MB
Acoplador de bus 3, Acoplador de bus 3 sensor externo
Instrucciones de manejo.
Pulsador sensor 3 plus de 2-/5 elementos F100
Instrucciones de manejo.
Gira X1
Instrucciones de uso para la aplicación del Gira Smart Home
Gira G1
Instrucciones de manejo (versión de firmware 3.3.88 y superior)
Módulo de sensor de temperatura del Gira G1
Instrucciones de manejo.
Actuadores de conmutación, 1/2 canales
Instrucciones de manejo.
Actuador de regulación de luz universal
Instrucciones de manejo.
Actuador combinado, Actuador de persiana 1 elemento empotrado, Actuador de calefacción 1 elemento empotrado
Instrucciones de manejo.
Fuente de alimentación de con bobina de choke integrada
Manual de instrucciones.
Suministro de tensión de 640 mA sin interrupciones
Manual de instrucciones.
Interfaz de datos USB, Mecanismo de interfaz de datos USB
Manual de instrucciones.
Acoplador de medios/repetidor RF/TP
Manual de instrucciones.
Actuador de conmutación de 2, 4 u 8 elementos 16 A y de 4 u 8 elementos 16 A carga C
Manual de instrucciones.
Actuador de conmutación / actuador de persianas, 16 A Standard & Komfort
Manual de instrucciones.
Actuador de persiana
Manual de instrucciones.
Actuador regulador de 1-/2-/4 elementos (I04)
Instrucciones de manejo.
Unidad de control 1 – 10 V de 4 elementos con accionamiento manual
Instrucciones de manejo.
Actuador de calefacción de 6 elementos con regulador para montaje en carril DIN
Manual de instrucciones.
Actuador de calefacción basic de 6 elementos
Instrucciones de manejo.
KNX Accionamiento de regulación 3
Instrucciones de manejo.
Módulo KNX para detectores de humos Dual/VdS y Q-Label
Manual de instrucciones y de montaje
Entrada binaria de 6 elementos 10-230 V CA/CC
Manual de instrucciones.
Entrada binaria de 8 elementos 12-48 V CA/CC libre de potencial
Manual de instrucciones.
Interfaz de pulsador universal de 2 o 4 elementos
Instrucciones de manejo.
Sensor táctil 4 Komfort
Manual de instrucciones.
Display languages
Operating instructions.
Protocol specification of TCP/IP Gira Control
Operating instructions.
Gira HomeServer / FacilityServer
Additional information
Set up IFTTT
This document describes the setup of IFTTT in connection with the Gira S1 and the Gira X1 or Gira HomeServer.
Set up Amazon Alexa
This document describes the setup of Amazon Alexa in connection with the Gira S1 and the Gira X1 or Gira HomeServer.
Set up Google Assistant
This document describes the setup of Google Assistant in connection with the Gira S1 and the Gira X1 or Gira HomeServer.
Gira HomeServer / FacilityServer
Operating instructions.
Gira HomeServer / FacilityServer - App
Gebrauchsanleitung.
Push button sensor 3 basic 1-/2-/3-gang
Technical documentation.
Push button sensor 3 comfort 1-/2-/3-/4-/6-gang
Technical documentation.
Bus coupler 3, Bus coupler 3 external sensor
Technical documentation.
Push button sensor 3 plus 2-/5-gang (from index I05)
Technical documentation.
Gira G1
Technical documentation (firmware version 3.2.148 or higher)
One-channel universal dimming actuator FM
Technical documentation.
Blind actuator 1-gang flush-mounted
Technical documentation.
Combination actuator blind and heating
Technical documentation.
Heating actuator 1-gang flush-mounted
Technical documentation.
Power supply with integrated choke
Technical documentation.
Power supply, 640 mA uninterruptible
Technical documentation.
USB data interface, USB data interface insert
Technical documentation.
KNX RF USB data interface (USB stick)
Technical documentation
KNX RF/TP media coupler or RF repeater
Technical documentation
Switching actuator, 2-gang, with manual activation 16 A
Technical documentation.
Switching actuator 4-/8-gang 16 A with manual activation
Technical documentation.
Switching actuator 4-/8-gang 16 A with manual activation and current measurement for C loads
Technical documentation.
Switching actuator / blind actuator 16 A Standard
Technical documentation, version 2.2.
Switching actuator / blind actuator 16 A Standard
Technical documentation, version 2.5.
Switching actuator / blind actuator 16 A Komfort
Technical documentation, version 2.2.
Switching actuator / blind actuator 16 A Komfort
Technical documentation, version 2.5.
Blind actuator, 2-gang/4-gang/8-gang 230 V AC
Technical documentation.
Dimming actuator 1-/2-/4-gang (I04)
Technical documentation.
Control unit 1 – 10 V, 4-gang with manual operation
Technical documentation.
Heating actuator 6-gang with controller DRA
Technical documentation.
KNX module for smoke alarm devices Dual/VdS and Q-Label
Technical Documantation
Binary input, 6-gang 10-230 V AC/DC
Technical documentation.
Binary input, 8-gang 12-48 V AC/DC, zero-voltage
Technical documentation.
Universal button interface, 2-gang
Technical documentation.
Universal button interface, 4-gang
Technical documentation.
Pushbutton sensor 4 Komfort
Technical documentation.
Rocker sets for pushbutton sensor 4
Assembly instructions.
Montageabstände
Mögliche Abstände bei Kombinationen Tastsensor 4
Actuador de calefacción Gira KNX de 6 elementos con regulador
Información del producto
Gira push button sensor 3
Product information Gira push button sensor 3 Controlling the Gira KNX / EIB electrical installation Order no. 17171 90
Gira Home Server
Product information Gira Home Server Controlling intelligent building technology easily – at home and while away Order no. 18871 90
Actualización de software del router IP KNX
Actualización de software para el router IP KNX desde el índice 02. KNX Secure está soportado por los dispositivos de I14.
Display languages
Software.
Gira Control Point
UPnP plug-in for the controlling of Loewe and Revox devices.
Gira Expert
Software for the Gira HomeServer 4 or Gira FacilityServer 4.
Gira HomeServer / Gira FacilityServer – Firmware
Attention! Only for Gira HomeServer 4 or Gira FacilityServer 4.
Gira X1 firmware update
To perform the update the Gira Project Assistant V 4.7 is required.
Logic node Schüco
Control of Schüco windows and Schüco sliding systems: The logic node uses the information from the 4-byte datapoint type "Status" of the Schüco KNX gateway to allow control with the Gira X1 function "Shutters/blinds".
ZIP, 467,0 KB
Gira Smart Home Windows Client 32 Bit
Gira Smart Home App for Windows PC
Gira Smart Home Windows Client 64 Bit
Gira Smart Home App for Windows PC
Gira G1 firmware update
Universal firmware that contains all supported operating modes. To perform the update the Gira Project Assistant V 4.7 is required. Please follow the instructions in the enclosed documentation.
Factory reset on Gira G1 via SD card
The file from the ZIP folder can be used to trigger a factory reset on the Gira G1 (up to firmware version 1.4.65). Please follow the instructions in the PDF file.
Gira S1 Windows Client 32 Bit
PC application for secure access to devices in the remote network.
ZIP, 7,9 MB
Gira S1 Windows Client 64 Bit
PC application for secure access to devices in the remote network.
ZIP, 8,0 MB
Gira S1 firmware update
For Gira S1 with index status I00 and I01. To perform the update the Gira Project Assistant V 4.7 is required.
Gira S1 firmware update
For Gira S1 with index status I02 or higher. To perform the update the Gira Project Assistant V 4.7 is required.
Gira L1 firmware update
To perform the update the Gira Project Assistant V 4.1 is required.
Gira X1 Logic modules "Gira G1 notification" & "Gira G1 DCS-state"
Gira G1 notification: This node is used for the easy generation of text messages on the Gira G1. Gira DCS-state: This node is used to evaluate the Gira G1’s door communication status.
ZIP, 461,2 KB
USB data interface, USB data interface insert
Project file for updating the USB data interface, from ETS5.
Gira OS Connect
Software zur Anbindung von Apple-Produkten an den Gira HomeServer/FacilityServer.
Gira HomeServer / Gira FacilityServer – Firmware
Mit dieser Datei können Sie die Firmware vom Gira HomeServer/FacilityServer auf die Version 4.6.0 via USB-Stick downgraden. Die Datei kann ab den folgenden Indexständen verwendet werden: - HomeServer: Indexstand I21 - FacilityServer: Indexstand I17 Bitte beachten Sie die Informationen in der ZIP-Datei.
Gira Door communication system
Basics, planning examples Door communication system Order no. 1736 90
PDF, 5,4 MB
ES
