Gira door station

The hands-free unit is equipped with a voice-operated switch. The microphone is automatically activated where the level is higher. If ambient noise at the front door is particularly high, the person at the home station can activate the microphone with an override function by pressing a button.

The door stations can be extended to include additional 1-gang or 3-gang call button modules. If a call button is unused – for example in a two-family house – a cover plate can simply be placed over that call button, or it can take on another function, such as light switching, in combination with a switching actuator. The name plates can be easily replaced without having to remove the cover frame. The buttons are evenly backlit in white or blue with maintenance-free, energy-saving LED.

The Gira flush-mounted door stations are perfectly equipped for outdoor use. They are made of unbreakable and scratch-resistant UV-stable thermoplastic and are rated to IP 44 in terms of water protection. Installing the inserts into 58 mm flush-mounted boxes in the wall ensures permanent and secure mounting. Fastening the cover frames using Torx screws ensures theft protection, as once installed, the door stations can only be removed with a special Torx screwdriver. To improve protection against theft, the cover frames can also be fastened with Tri-Wing screws, which are optionally available.

With the Gira Inscription Service, call buttons can be professionally designed according to your personal specifications. This can be done quickly and easily online. In just a few steps you can create a personal template and order it via the form on www.beschriftung.gira.de. The finished label (available for a fee) is then delivered without delay. There is also a PDF template online that you can print out yourself free of charge. As an alternative, electrical trade specialists can use the 'DesignPro Edition Gira' inscription software from Avery Zweckform. Gira offers suitable DIN A4-size inscription sheets.

The door station is installed in the 58 mm flush-mounted device box in combination with the frame from the Gira TX_44 design line. A mounting plate is used to cover installation openings in the wall from a previous door intercom system when the Gira door communication system is retrofitted. It consists of anodised aluminium and has holes for wall mounting and openings for receiving the Gira flush-mounted door station.