Gira Dual Q smoke alarm device

• Q seal for enhanced quality
• Visual alarm via a red LED ring indicator
• Acoustic alarm with a loud, pulsating tone
• Module interface for networking with optional wireless, relay, or KNX module
• Battery life of at least 10 years
• Reduction in the number of false alarms
• Detection of smoke through scattered light measurement

• Rapid recognition of fire type through heat measurement
• Device can be checked without disassembly
• Up to 40 devices can be networked
• Button for function test and deactivation of scattered light measurement
• Battery failure warning (30 days)
• Disassembly safeguard

Awarded the Q seal, the Gira Dual Q smoke alarm device fulfils increased quality criteria according to the vfdb guideline 14-01 and DIN EN 14604:2009-02. The Q seal stands for certified long service life and the reduction of false alarms with simultaneously increased stability, e.g. against external factors.
More about the Q seal

The Gira Dual Q smoke alarm device detects smoke accumulation using the principle of photoelectric scattered light measurement with processor-controlled signal analysis. A light diode in the smoke chamber emits light beams. Smoke penetrating the chamber interrupts these light beams and diverts them to a receiver diode. The alarm is triggered.

The Dual Q smoke alarm device detects the build-up of heat via an additional thermal sensor: In this way various types of fires, such as liquid fire, can be registered more rapidly and reliably identified. Alarm behaviour can also be better controlled in areas with unavoidable interferences such as kitchen vapours, dust and electrical interference.

The Gira wireless diagnostic tool enables Gira smoke alarm devices Dual Q to be checked at ground or floor level or from outside the room, for example from stairways. It consists of the wireless diagnostics USB box and the wireless diagnostics software in German and English. The data is transferred without removing the device.

For even more safety, comfort and efficiency, the functions of the Gira Dual Q smoke alarm device can be expanded through other devices available as optional extras: Networking up to 40 devices by wire or wirelessly, checking their functionality at ground or floor level or even from outside the room, integrating them into the KNX system or connecting them to external alarm devices.

Smoke alarm devices are lifesavers – and must therefore be able to do their job reliably in case of an emergency. For this reason, you must ensure that they are correctly installed. In order to ensure that smoke alarm detectors are professionally installed in accordance with DIN 14676, the standard provides recommendations for verifying the professional competence of service providers performing the planning, installation and maintenance of such devices.

The Gira Dual Q smoke alarm device continuously monitors its smoke analysis and checks the battery voltage. Any faults are indicated by a fault signal (signal tone and LED). The Gira Dual Q smoke alarm device signals that the device will have to be replaced 30 days in advance. The device remains completely functional during this period.

Thanks to its disassembly safeguard, the Gira Dual Q smoke alarm device is also highly suitable for ­installation in kindergartens, commercial properties and rental properties. The disassembly safeguard can be optionally activated on the mounting plate. Afterwards the locking mechanism can only be opened with a tool – for maintenance work, for example.