Gira short light profile

Short energy profile with light element, colour aluminium

Short Gira energy profile with light element, anthracite

The small light for outdoors. The Gira light profile is a component that provides outdoor lighting along garden paths, near flower beds and in entrance areas, for example. In addition to a diffusing plate for optimum illumination, the light element features a narrow light beam on the rear for better orientation.

Where needed, the Gira light profile can be used to illuminate the path or a particular object: For this purpose the diffusing plate is replaced by an optional slat element.

Online catalogue

Downloads

Light element

Aluminium reflector with acrylic glass plate
Suitable for light sources with E27 screw base
Pre-assembled and ready-to-connect
Can be connected using a plug-in terminal block
IP 44 water protection
Supplied without light source

Materials

The housing, cover and base of the Gira light profile are made of robust, weather-resistant aluminium with an easy-care surface. It is scratch-resistant, dirt-resistant and conforms to the GSB standard in the colour anthracite.

Installation

On hard surfaces, the base of the Gira light profile is fixed to the ground using only one wall plug. For soft surfaces, it is easily fixed using an optionally available ground anchor that is driven into the ground. When laying the cable in the garden, other than a trench cutting machine, mini-digger or excavation by hand, the use of an ‘impact mole’, which is shot through the earth, is particularly recommended as it causes very little damage to the garden.

Dimensions

Profile

H 491 x W 142 x D 75 mm

Base

H 10 x W 229 x D 155 mm

Download

Installation instructions

Energy Profile, Light Column

Operating instructions, Energy profile (1341 ..), Energy profile with lighting element (1342 ..), Light column (1343 ..), Light column, short (1344 ..).

Bestell-Nr 1341 .., 1342 .., 1343 .., 1344 ..

PDF, 220,4 KB

Download