Gira RDS flush-mounted radio

The speakers can be installed directly next to the radio's operating element, or at a distance of up to 20 m when connected with a 2-wire line. The radio automatically detects connected speakers and switches between stereo and mono mode.

The radio's functionality can be extended using the integrated 230 V auxiliary input. For example, if an automatic control switch or the bathroom light is connected to this, the radio is automatically switched on or off together with the light.

• The radio insert and speaker can be installed individually in 1-gang cover frames or together in a 2-gang to 5-gang cover frame, either vertically or horizontally.
• Each radio component is installed in its own flush-mounted device box (recommendation: deep switch box).
• The radio insert requires a 230 V power supply
• The speaker and the Gira additional speaker for stereo operation can each be installed a maximum of 20 metres from the operating section using a 2-wire line.
• The optional cinch socket outlet is connected to the radio insert at a maximum distance of 3 metres using a 3-wire line.
• Installation in combination with other electronic components can negatively affect the reception quality.

• Frequency range: 87.50 to 107.90 MHz
• RDS function: if the received station transmits the RDS signal, the station name will be shown in large letters and the station frequency in small letters on the display. In this case, the current time will also appear without having to make any settings for this purpose.
• Capacitive sensor technology: the radio buttons need only be lightly touched for operation. Especially convenient: to turn the radio on you don't need to touch the On/Off surface specifically – anywhere on the entire operating surface will do.
• Sleep mode: the radio switches off automatically 30 minutes after sleep mode is activated.
• Station presets: during initial start-up, the two strongest stations are automatically stored in the two station presets. These can then be reassigned as desired by pressing and holding the memory button.