Important information
After the firmware update the Gira G1 is protected by a device password. The password can be found on a label on the Gira G1. If no password is noted here, the password is "device". Please change the device password during configuration.
To illustrate the start-up and provide support, a brief training video has been made to explain the firmware update. You can find the video in the Gira Academy. It is available in English, Dutch and German.
New functions
With the firmware update v102.0.20 the Gira G1 can also be used as a client in systems with a Gira eNet server. All functions of the Gira eNet server are supported thereby.
Please note that the following functions are not supported in this version:
- Door communication
- Weather service
- Alarm system
Further releases are already planned for these functions.
The following restrictions also apply:
- Please note that the operating behaviour of the touch function – in the current firmware version – for eNet momentary-contact actuators (long-press operation) and their status feedback are currently being optimised.
- During a firmware update via WLAN, the Gira Project Assistant erroneously displays that the update was not successful. Please check on the Gira G1 whether the update was successful.
- In the case of operation with a PoE application, no connection via WLAN is possible although this is offered by the Gira G1.
GB