Gira surface-mounted home station

Quick, no-fuss surface-mounted installation.

The Gira surface-mounted home station offers particularly convenient wall-mounting solutions.

Completely pre-assembled, it is only 21 mm thick and can be installed quickly and easily, with or without frames as desired.

Functions and features

The voice quality achieved by all the Gira home station models can be compared to quality levels achieved in mobiles or hands-free systems in cars. The user selects his/her favourite from five different ringtone melodies as well as the optional light switching function – for staircases, for example – which can be implemented with an additional switching actuator. In addition to accepting calls and opening doors, other functions include switching the ringtone on and off, regulating the ringtone and voice volume, and switching up to three home stations in parallel.

Speaker and microphone

The hands-free unit is equipped with an echo suppressor. The microphone is automatically activated at the location where the level is higher. If ambient noise at the front door is particularly high, the person at the home station can activate the microphone with an override function by pressing a button.

Installation with or without frame (simply leave the frame out)

  1. Strip the supply cable flush with the wall.
  2. Mark the drilling holes. Select the installation spot so that the mounting plate is centred over the cable outlet.
  3. Drill the two mounting holes and insert the wall plugs.
  4. Attach the mounting/base plate with the cover frame to the wall with two screws.
  5. After installing the mounting/base plate, the home station is connected:
    the 2-wire bus to the bus terminals, any additional power supply used to the additional supply (AS) terminals (one additional power supply per device is required for more than three surface-mounted home stations video called in parallel),
    the lines of the floor-call button to the floor call button (FC) terminals.
  6. Close the home station: to do so, place the upper housing section on the mounting plate and snap it into place.

Mounting on a flush-mounted device box

  1. Strip the supply cable.
  2. Place the mounting plate and cover frame onto the flush-mounted device box.
  3. Secure the mounting plate to the support ring of the flush-mounted device box with two screws.

Technical data

Power supply:

26 V DC ± 2 V (bus voltage)

Connections door communication bus coupler:

2-wire bus:
2 x screw terminals
floor-call button:
2 x screw terminals


System 55 and E22:
W 55 x H 127 x D 20 mm
W 70 x H 142 x D 20 mm

Ambient temperature:

0°C to +50°C

Installation type:


Gira door communication system

Order/download free of charge
The delivery results subject to countries specific assortments

Door intercoms for indoor use


Gira uses cookies for websites in the domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.