Gira surface-mounted video door station

Installed surface-mounted, with colour camera.

In addition to the Gira door station for flush-mounted installation, the Gira door communication system also offers two different door stations with colour camera for surface-mounted installation: They are completely pre-assembled (except for the camera) and are only 19 mm thick.

First, an anodised aluminium carrier profile with the PCB unit and functions is screwed onto the wall, then a cover frame protected against weathering is installed.

Speaker, microphone

The hands-free unit is equipped with an echo suppressor. The microphone is automatically activated at the location where the level is higher. If ambient noise at the front door is particularly high, the person at the home station can activate the microphone with an override function by pressing a button.

Call button

The name plates of the call buttons can be easily replaced without having to remove the cover frame. The buttons are evenly backlit in white with maintenance-free, energy-saving LED. If one of the call buttons on the 3-gang variant is unused – for example in a two-family house – a cover plate can simply be placed over that call button, or it can take on another function, such as light switching, in combination with a switching actuator.

Colour camera

All-seeing eye: the Gira colour camera has a wide-angle lens, enable it to cover an area of 100° in real terms. For alignment, the lens can additionally be swivelled manually by 20° in any direction. Temperature-dependent heating provides protection at sub-zero temperatures. Note: If the colour camera is used, the video control device is required. In the event of damage, the camera dome can be replaced independently of the electronics.

Day/night switching of the colour camera

An additional feature: day/night switching. If the ambient brightness drops below a value of 1 lux, it automatically switches over from day to night mode. During the day, the colour camera ensures optimal colour rendering by means of automatic backlighting compensation, gain control and white balance. At night, it delivers extremely clear black and white images thanks to its light sensitivity. In order for the CCD sensor to detect all the details in the dark, the colour camera is additionally equipped with LEDs for uniform illumination of the camera's field of view.

Materials, installation

The Gira door stations are perfectly equipped for outdoor use. They consist of shatter-proof and scratch-resistant, UV-stable thermoplastic and have IP44 water protection. Fastening the cover frames using Torx screws ensures protection against theft, as once installed, the door stations can only be removed with a special Torx screwdriver. To improve protection against theft, the cover frames can also be fastened with Tri-Wing screws, which are optionally available.

Inscription service

With the Gira Inscription Service, call buttons can be professionally designed according to your personal specifications. This can be done quickly and easily online. In just a few steps you can create a personal template and order it using the online form . The finished label (available for a fee) is then delivered without delay. There is also a PDF template online that you can print out yourself free of charge. Electrical trade specialists use the 'DesignPro Edition Gira' inscription software from Avery Zweckform. Gira offers suitable A4-size inscription sheets.

Mounting plate

The mounting plate is used to cover installation openings in the wall from a previous door intercom when the Gira door communication system is retrofitted. It consists of anodised aluminium and has holes for wall mounting and openings for receiving the Gira flush-mounted door station.

Mounting plate dimensions

Mounting plate, 2-gang

W 130 mm x H 253 mm

Mounting plate, 3-gang

W 130 mm x H 253 mm

Mounting plate, 4-gang

W 130 mm x H 346 mm

Technical data

Power supply

26 V DC ± 2 V (bus voltage)


2 screw terminals 2-wire bus
2 screw terminals additional power supply


W x H x D 110 x 253 x 19 mm (without camera)
W x H x D 110 x 253 x 40 mm
(with camera)

Dimension of name plates

W x H 62 x 18 mm

Image capture element

CCD sensor 1/3"

Wide-angle lens

150° aperture angle

Visible range of detection

Angle of detection of camera 100°

Area of detection (when swivelled by 20°)


Colour system



500 (H) x 582 (V)

Horizontal resolution

380 TV lines

Switching threshold for colour to B/W operation

1 lux

Light sensitivity in B/W operation

0.1 lux

Electronic shutter speed:

up to 1/100000 s

IR filter


Recommended camera installation height

1.50 m

Temperature range

-20°C to +50°C

Protection type

IP 44

Gira door communication system

Order/download free of charge
The delivery results subject to countries specific assortments



Gira uses cookies for websites in the domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.