Gira KNX presence detector Standard

Energy-efficient light and climate control

The Gira KNX presence detector Standard is used for presence monitoring and motion detection indoors. It is installed on the ceiling and detects even the slightest motion in a range of 360°. This enables various functions in the KNX system such as lighting, heating, and ventilation to be controlled exactly as needed and to save power. Three digital PIR sensors ensure quick and precise motion detection. The crossed light paths of the sensors ensure that the detection range is covered without any gaps.

A brightness sensor is integrated for daylight-dependent lighting control. In addition, the Gira KNX presence detector Standard is able to analyse user behaviour and independently optimise the delay time. This saves energy and conserves the light source by preventing unnecessary switching on and off. Only a minimum and maximum value must be specified for this purpose: Depending on the duration of the movement detected in the room, the Gira KNX presence detector Standard will select a correspondingly short or long delay time.

  • Precise presence and motion detection
  • Daylight-dependent lighting control
  • Energy-saving optimisation of the delay time
  • Three digital PIR sensors
  • Sensor sensitivity can be adjusted individually
  • Diverse potential applications
  • Large detection range
  • Integrated bus coupler

Precise presence and motion detection

The Gira presence detector Standard doesn’t miss a thing: It is equipped with three digital PIR sensors, which cover a range of 360° (3 x 120°). At a mounting height of 3 m, it has a nominal range of approximately 12 m at desk height and 20 m at floor height.


Sensor sensitivity can be adjusted individually

The sensitivity of the three PIR sensors can be set individually and flexibly adapted to individual installation scenarios. This enables movements to be reliably detected and prevents accidental triggering. In addition, the detection range can be limited using a clip-on panel.


Daylight-dependent lighting control

An integrated brightness sensor measures the current light intensity, thus providing the option of lighting control depending on the daylight available. This means that the lighting is only switched on when the room is not bright enough. If there is sufficient daylight, the lights stay off. The dusk stage of the brightness sensor can be set via the ETS, by using the teach-in function on the device, or by using any operating devices such as the Gira pushbutton sensor 3.


Diverse potential applications

The Gira KNX presence detector Standard can be used as an individual device, main unit, or auxiliary unit, and is thus suitable for equipping a wide range of properties. When used as a main unit or auxiliary unit, semi-automatic, as well as fully-automatic control is possible. There is a choice of three preconfigured operating modes: presence detector, ceiling monitor and alarm device.


Energy-saving optimisation of the delay time

Adaptive delay time:

The Gira KNX presence detector Standard offers the option of continuously analysing user behaviour, thereby independently optimising the delay time (transmission delay). This saves energy and conserves the light source by preventing unnecessary switching on and off. The longer the period during which motion is detected in the room, the longer the delay time. In contrast, if a room is only entered for a brief period, the Gira KNX presence detector Standard also selects a short delay time. Occupants can freely define the minimum and maximum values themselves.

Short-term presence function for conference or training rooms:

The short-term presence function was developed as an addition to the adaptive delay time especially for light and climate control in conference and training rooms. If the Gira KNX presence detector Standard detects motion only briefly, it selects the minimum delay time regardless of the self-taught value. As a result, lighting, heating, and ventilation will not remain switched on unnecessarily if somebody enters the room temporarily during a long conference break, e.g. the cleaning staff or catering service.


Large detection range

The maximum detection range on the ground is approx. 20 m for a mounting height of 3 m.


Influence of the direction of motion on the size of the detection range

Movements of people who pass by the side of the device (tangential, left) can be detected from a greater distance than movements of people approaching or moving away from the device straight on (radial, left).


Installation

The Gira KNX presence detector Standard is delivered as a ready-to-connect complete device with an integrated bus coupler for flush-mounted installation. The device can also be fastened directly on the ceiling with the optional surface-mounted housing. When used as a motion detector, installation heights between 2.20 m and approx. 5 m are possible. If the device is used as a presence detector, a mounting height of 3.5 m should not be exceeded.


Accessories

Protective cage and mounting ring for surface-mounted installation


Dimensions


Device components


Technical data

Mounting height:
2.2 m to 5 m
Detection angle:
360º
Nominal range floor:
approx. ∅ 20 m (mounting height 3 m)
Nominal range Desk height:
approx. ∅ 12 m (mounting height 3 m)
Brightness:
10 to 2000 Lux
Ambient temperature:
-5 °C to +45 °C
Dimensions:
∅ x H 103 x 50 mm
Installation type:
Flush mounted or surface-mounted (in conjunction with a surface-mounted housing)

Download

Operating instructions

KNX Presence detector Standard, Comfort

Operating instructions.

Bestell-Nr 2105 .., 2106 ..

PDF, 2,0 MB

Download

Technical Documentation

KNX presence detector Standard

Technical documentation.

Bestell-Nr 2105 ..

PDF, 5,6 MB

Download

Product information

The following files are not available in the language you have selected, but may be in other translations.

Gira KNX Präsenzmelder Standard / Komfort

Bestell-Nr 18674 10

PDF, 238,3 KB

Download

Brochures

Gira for the home

Planning tool for intelligent electrical installations Order no. 1911 90

Bestell-Nr 1911 90

PDF, 1,9 MB

Download


Gira Smart Home

Bestell-Nr 18124 90

PDF, 2,0 MB

Download

Back to top Installation Dimensions Download