Operating devices for controlling eNet SMART HOME

There are five different control options for the Gira eNet SMART HOME system. All the functions of the eNet system can be easily and intuitively controlled via the app, using the Gira G1, with wireless operating top units, manually or via wall transmitters. The various operating devices are shown below.

Control your building technology while on the move with the eNet SMART HOME app

The eNet SMART HOME app is intuitive and makes it fun to manage your home. The controls are always the same – whether you are at home or on the move with remote access activated. With the app, it is possible to activate individual functions and configure various timers, including astro function, scenes and if-then rules. All helping to make life in your home even more agreeable.

Download the eNet SMART HOME app (Android) in the Google Play Store here

Download the eNet SMART HOME app (iOS) in the Apple App Store here


Lighting control

Switching lights on and off, or dimming them precisely to the desired setting: With the eNet SMART HOME app, lighting can be controlled with maximum flexibility. Additional settings like switch-on or switch-off brightness can also be configured.

Blind control

Raising and lowering blinds and shutters, or moving awnings in or out: With a smartphone everything can be controlled via the eNet SMART HOME app – at home and while on the move.

Heating control

Combined with smart heating control from tado°, the room temperature can be controlled via the eNet SMART HOME app, and the actual temperature and humidity visualised.

Start screen

The "My Home" start screen area on the eNet SMART HOME app can be individually configured: This is where desired scenes are visualised and executed and frequently used functions are displayed as favourites.

Operating mode heating control

The mode of the tado° system can be configured in such a way that a changed setpoint temperature only applies for a certain period – or permanently until a different one is specified. The setpoint temperature can also be set to change automatically.

Room overview

All rooms are visualised in the eNet SMART
HOME app: So you can see at a glance which function is active in which room. If a light has been left on, for example, it can be switched off while on the move.

Central control

Central functions can be carried out directly in the
room overview: All
the lighting, for example, can be switched on and off, the temperature controlled or the shading raised or lowered.

Scene configuration

Because the perfect room ambiance includes the right light, the ideal temperature, and suitable privacy protection: Using the eNet SMART HOME app, the desired atmosphere can be configured and changed quickly.

Timer configuration

The timer on the eNet SMART HOME app can be used to configure many functions: Certain functions can be automatically triggered at a specified time every day or only on certain days of the week. It is also possible to activate functions depending on sunrise or sunset.

If-then rules*

A function is activated automatically if a certain event occurs. If, for example, the outside brightness has reached a certain value, the light switches off automatically to save energy. Or if the sunlight becomes too intense, the blinds go down and the room stays cool.

User management

The eNet SMART HOME app makes it simple
and convenient to create new users
in the system or change existing access rights. Because not everyone in the home should have access to everything – this is especially important in households with children.

Remote access

The eNet SMART HOME app ensures that homes can also be accessed remotely. The functions can also be controlled when residents are absent by activating remote access in the app. Remote access is free of charge for the first 12 months. After this, it costs €29.95 per year.

Gira G1 eNet SMART HOME Client

Controlling all areas of the personal eNet SMART HOME system from home with the Gira G1: The intelligent central operating unit enables intuitive access to all functions. The Gira G1 eNet client fits perfectly in your rooms with a design that is both future oriented and simple.

Gira eNet wireless operating top units

The wireless operating top units from the Gira eNet system are easy to mount and can make conventional electrical installations suitable for wireless operation. Components from other systems can be integrated too. The functions of existing touch dimmers or inserts for blind control are added to the eNet system by means of easily installed top units and can thus be controlled wirelessly.

Switching and dimming lights wirelessly

A brief tap switches the light on or off. Longer contact dims the light continuously: If the top part of the rocker is pressed, the light becomes brighter; if the bottom is pressed, the light becomes dimmer. The LED display signals the On/Off state and learning mode. Conventional Gira switching/dimming top units can be exchanged easily and replaced with Gira eNet wireless operating top units.

Controlling blinds wirelessly

The eNet wireless blind control button enables blinds to be conveniently controlled via wireless actuators with just a single touch. It offers a high level of operating convenience thanks to the bi-directional Gira eNet system: The LED display signals the raising and lowering of the blinds, as well as the learning mode. Conventional Gira control buttons can be exchanged easily and replaced with Gira eNet control buttons.

The easiest way to switch
and dim wirelessly

Existing switches or buttons, e.g. from System 2000 for light or blind control, can be replaced with eNet wireless operating top units. Simply remove the existing operating top unit and replace it with the eNet wireless operating top unit.

Gira eNet wireless wall transmitter

Battery-operated eNet wireless wall transmitters can be conveniently placed exactly wherever switches or buttons are required, regardless of the mains connections – whether fixed to a wall with screws or conveniently attached to smooth surfaces such as glass panes with adhesive strips. Two-colour LEDs indicate successful signal transmission and the status of the actuator.

Easily controlling up to six functions

Wall transmitters are available in 1-gang and 3-gang versions. In principle, all wall transmitters have the same functions and are differentiated by the number of buttons. The buttons/rockers are assigned fixed functions – up to six functions can be used in a 3-gang wall transmitter because the rockers can be controlled on both the left and the right.

Calling up programmed default settings

Scenes are programmed default settings, enabling the user to create a suitable lighting mood in the living room, while simultaneously lowering the blinds, for example – and all at one press of a button. Scenes make it possible to set and save default settings and call them up again at the press of a button using entire groups of actuators (receivers for lights or blinds). To use the scenes function, a transmitter that can trigger scene telegrams is required. This can be any eNet wireless transmitter that is set to 'Scenes' operating mode. The scene numbers are factory preset in the hand-held transmitters and wall transmitters.

Always wherever they are needed

The wireless wall transmitter is notable for its particularly slimline design. This means that the device can be adhered directly to smooth surfaces such as glass and wood without any additional housing. Regardless of the mains connections, it can be attached wherever switches and buttons are needed. With the wireless wall transmitter, previously installed switches and switch combinations can also be expanded with no fuss or mess to include additional switches and buttons.

Gira eNet wireless hand-held transmitter

Gira eNet wireless hand-held transmitters enable convenient operation of building technology. Lights can be switched and dimmed, blinds can be controlled or various scenes can be called up using large operating buttons. The wireless hand-held transmitter is available in four variants – from simple to multi-functional.

Gira eNet wireless hand-held transmitter 1-gang, 2-gang, and 4-gang

The eNet system can be controlled conveniently with the eNet wireless hand-held transmitters. Featuring one large operating button, the compact battery-operated 1-gang wireless hand-held transmitter is the easy-to-handle remote control for all light and blind actuators. The 2-gang wireless hand-held transmitter transmits switching, dimming and blind adjustment commands using four buttons, two of which belong to each operating channel. The 4-gang wireless hand-held transmitter has the same functions as the 2-gang hand-held transmitter, but features two more operating channels. Alternatively, it can call up additional scenes in scene mode. For all hand-held transmitters, the signal transmission and actuator status are indicated by a two-colour LED.

Gira eNet wireless hand-held transmitter Multi

The Gira eNet wireless hand-held transmitter Multi provides a convenient user interface via the display, which shows the particular status of actuators and enables numerous functions. With the hand-held transmitter, the light and blind functions can be called up individually, in groups, or as a scene. The hand-held transmitter has 24 function channels and 16 scene channels. They can be clearly designated using free-text names and organised in individual, clear lists. Operation is performed using buttons and the menu control. The hand-held transmitter Multi cannot be used in an eNet SMART HOME project, but only in an eNet project.

The delivery results subject to countries specific assortments



Gira uses cookies for websites in the domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.