Gira Touchdimmer

Dimming in a nutshell

A light touch is all that’s needed to operate the Gira Touchdimmer as it uses capacitive sensor technology. The desired brightness level can be set directly, simply by touching the appropriate LED.

The last LED selected indicates the brightness level that was just set by lighting up. A fine acoustic signal also provides feedback on operation.

Dimming levels

When switched off, the Gira Touchdimmer can be switched on directly at any desired dimming level – simply by touching a specific point on the row of LED dots. Users can likewise change directly from the dimming position already set to any other level. The brightness level currently selected is indicated by the respective LED lighting up. Running a finger along the row of LED dots causes the light to slide to brighter or darker values.

Switching on/off

The lower half of the operating surface contains an LED that lights up for orientation as long as the Gira Touchdimmer is switched off. When the lower half is touched, the Gira Touchdimmer switches on with a stored memory value. To turn off the Gira Touchdimmer, another light touch to the lower operating surface is all that's required.

Memory value

The memory value is also set using the lower operating surface. When it is pressed and held for approximately 4 seconds, the Gira Touchdimmer stores the currently set brightness level in the memory.

Technical data

Dimming levels



via five blue LEDs


the outer left LED identifies the minimum, and the outer right LED identifies the maximum brightness level
, there are seven other dimming levels in between

Memory function

adjustable with 4-second setting time

Ambient temperature

+5°C to +45°C

Touch switching top unit

The Gira touch switching top unit is available to match the Gira Touchdimmer. It also features capacitive sensor technology and can be operated by a light touch of the finger. Both touch products offer a uniform appearance. This is particularly advantageous when the Gira touch dimming unit is installed together with other light switches.

The Gira touch switching top unit features a blue LED on the operating surface. This lights up for orientation in the dark and goes out as soon as the switch is actuated.

Dimming and switching inserts

The Gira touch dimming top unit and the Gira touch switching top unit can be combined with various inserts from the Gira System 2000.

Top units

Gira touch dimming top unit

System 2000 universal dimming insert 0305 00,
Connected load 50 to 420 W/VA

System 2000 LV dimming insert 0331 00,
Connected load 20 to 500 VA

System 2000 1-10-V control unit insert 0860 00

Gira touch switching top unit

System 2000 Tronic switching insert 0866 00

System 2000 Triac switching insert 0854 00

System 2000 relay insert 0853 00

System 2000 relay insert potential-free 1148 00

System 2000 HVAC relay insert 0303 00

The delivery results subject to countries specific assortments



Gira uses cookies for websites in the domain. By using our website, you agree to the use of cookies. Our Data Protection Declaration contains more information about the cookies used by us or third parties and the ways in which you can deactivate cookies.