Gira surface-mounted video home station Plus

Featuring image memory and polyphonic ringtones

The Gira surface-mounted video home station Plus has a homogeneous front and features a state-of-the-art 5.6 cm (2.2”) TFT colour display. Thanks to its capacitive sensor technology, it can be conveniently operated by lightly touching the buttons. To ensure greater operating reliability, internal calls and switching actions can be assigned individual names. The speakerphone function is so sensitive that the speaker can be understood, even when they are not standing directly in front of the microphone.

Other features of the Gira surface-mounted video home station Plus include additional functions for even more convenient use. The local image memory can be reviewed to see who rang the doorbell while you were out. Customised polyphonic ringtones can also be saved on the integrated microSD memory card.

  • Can be integrated into the Gira design lines
  • Operating buttons with capacitive sensor technology
  • Speaker with connectible microphone
  • Automatic call acceptance for internal calls
  • Local image memory
  • 5.6 cm (2.2”) TFT colour display
  • Status display and menu navigation in the display
  • Automatic door opener
  • Ten polyphonic ringtones can be saved
  • Card slot for microSD memory card

Can be integrated into the Gira design lines

Integration into the Gira design lines facilitates the uniform appearance of the door communication system and electrical installation. Available for the Gira Standard 55, E2, Event, Esprit, ClassiX, and E22 design lines, as well as the F100 design lines. If desired, the home station can also be installed without the frame.

Gira design lines


5.6 cm (2.2”) TFT colour display

The state-of-the-art 5.6 cm [2.2"] TFT colour display offers good visibility from various angles of vision and a high depth of focus, especially when visitors are standing a little further away from the door. In addition to this, system settings can be made via an on-screen display, similarly to the way they are set on televisions. The display is activated automatically as soon as someone rings the doorbell, but can also be switched to manual operation.


Operating buttons with capacitive sensor technology

A special feature of the Gira surface-mounted video home station Plus is its homogeneous front with the integrated operating buttons. The operating buttons feature capacitive sensor technology and react to the slightest touch.


Speaker with connectible microphone

The intercom unit is equipped with a voice-operated switch. The microphone is automatically activated where the level is higher. If ambient noise at the front door is particularly high, the person at the home station can activate the microphone with an override function by pressing a button.


Automatic door opener and automatic call acceptance for internal calls

Both features are optionally enabled by the electrician and can then be activated via the menu. The functions are very convenient, e.g. for medical practices, and enable doors to be opened automatically as well as speaking or listening directly in a room, e.g. from the reception to the doctor's consulting room and vice versa.


Local image memory

Depending on the settings, up to three images are taken and saved whenever the doorbell is rung. This allows you to see who was at the door while you were out. If desired, images can also be recorded manually during a conversation.


Card slot for microSD memory card

Up to ten customised polyphonic ringtones can be saved on the integrated microSD memory card. During installation, the microSD memory card is inserted at the rear of the device so as not to disturb the harmonious appearance.


Installation

The Gira surface-mounted video home station Plus can be easily installed in two steps: During the rough installation, the base plate is first mounted on the wall with the connection terminals. Pre-wiring can thus be carried out without the device. The home station is later locked directly onto the mounting plate, establishing automatic contact with the device.


Technical data

Power supply:
26 V DC ± 2 V (bus voltage)
Connections:
2-wire bus: 2 screw terminals Floor-call button: 2 screw terminals Additional power supply: 2 screw terminals
Temperature range:
0 ºC to +50 ºC
Dimensions:
W 55 x H 127 x D 21 mm
Colour system TFT colour display:
PAL
Screen diagonal:
5.6 cm [2.2"]
Screen resolution:
320 x 240 (H x V), QVGA
Installation type:
Surface-mounted

Download

Operating instructions

Surface-mounted home station video Plus

Installation and operating instructions

Bestell-Nr 1239 .., 1279 ..

PDF, 1,8 MB

Download

Brochures

Gira door communication

Bestell-Nr 18123 90

PDF, 2,2 MB

Download

Software

Ringing tone melodies for the surface-mounted home station video Plus - ZIP A

Original ringing tone melodies of the surface-mounted home station video Plus

Bestell-Nr 1239 ..

ZIP, 2,4 MB

Download


Ringing tone melodies for the surface-mounted home station video Plus - ZIP B

Ringing tone melodies 1 -5 fromthe surface-mounted home station video for use in the surface-mounted home station video Plus

Bestell-Nr 1239 ..

ZIP, 486,4 KB

Download

Guides / system basics

Gira Door communication system

Basics, planning examples Door communication system Order no. 1736 90

PDF, 5,4 MB

Download

Back to top Download