The room terminal is the central control and operation unit for patient or resident rooms. Large buttons serve to mark the presence of care personnel and doctors and to trigger calls and emergency calls.
Room module with call and presence button
The room module with call and presence button is the compact central control unit for patient and resident rooms. It is equipped with one red and one green button. The red button is used to trigger calls and contains a red LED as a location/reassurance light.
The call button is fitted with a red button. It is used to trigger calls and contains a red LED as a location or reassurance light. In addition to the simple version, there is also a call button with a diagnostic jack and/or ancillary plug contact.
Call and switch-off button with ancillary plug contact
The call and switch-off button features a red and a green button. The red button is used to trigger calls and contains a red LED as a location/reassurance light.
The presence buttons are available with one button (either green or yellow) or with two buttons (one green, one yellow).
Blue doctor alert button
The doctor alert button (blue) features a blue button that calls a doctor for assistance. It contains a red LED as a location/reassurance light.
The pear button is a patient hand-held device with call triggering and location light or reassurance light. It is connected to a call button with an ancillary plug contact using the 2 m long connection cable and the 8-pole plug.
The Gira multiple button is a patient operating device with a call button and with either one or two light buttons. Calls/emergency calls are triggered using the red button with location light or reassurance light. The room light or a reading light can be switched on or off with the yellow light button.
The wireless sets are made up of a mobile transmitter for triggering calls and a receiver with an 8-pole plug that is suitable for connection to an ancillary plug contact.